Will this fit my 00 taco

http://www.lowrangeoffroad.com/builderparts/shock-mounts/rear-upper-shock-mount.html


I'm wanting to relocate my rear shocks for more / better travel .

 

http://www.lowrangeoffroad.com/lower-shock-mounts.html#product-media-modal

With these welded to the axle

 

Bump anyone ?

 

Yes I can read also but was wondering if anyone made it work for my application

 

On the phone with LROR they have one for a tacoma !!

Don't have it gonna make it custom I guess

 

That shouldn't be hard to measure out and use that particular one.

If you're going to make one I imagine you have the skill set to alter this one.

A simple tube in between the frame with some shock tabs wouldn't be too difficult.


Good luck and remember, measure twice and cut once.

 

I was told 2 inches on each side will need to filled

 

Not bad, slip come c-channel steel in there and weld if up!

 

BAMF makes one as well.

http://bayareametalfab.com/1st-Gen-Shock-Relocation-Kit_p_53.html

 

I knew someone made one thanks good looking out as other member suggestions were not useful

 

No problem


Also, if you have some fab skills, it is pretty easy to make your own if you are not looking for the adjustability, and only slightly more work if you are. I helped @Squeaky Penguin with his, a few pieces of plate for the frame, a piece of tube, and some RuffStuff tabs.