What have you done to your Tacoma today? 1st Gen Edition

Redline struts

 

These well work. They are universal. You just have to chose your options and fit them into your headlight

https://www.theretrofitsource.com/c...ts/bi-xenon-morimoto-mini-stage-3-kit-h1.html

https://www.theretrofitsource.com/c...-xenon-mini-stage-3-kit-d2s.html#.VmnR2UllDqA

 

Where can I get reasonably priced manual hub cv axles that won't get shredded by a 3" lift?

 

Much jealous.

 

Gotta pick a color that will stand out. Green is my favorite color but that might be too much on the eyes. But your blurnt orange idea sounds like an amazing color to go with

 

Here is that burnt orange on a jeep. I had the Photoshop thread shop it into a Tacoma, let me see if I can find it...

 

Are there any down sides to monsterlineing your truck? Besides protecting against scratches and rock chips?

 

Reasonably priced doesn't really exist with the manual hub CV remans. You want at least a reman cause the "NEW" ones are cheap Chinese junk whereas the remans usually start with a Toyota core. I bought a reman at NAPA and one at Oriellys both aren't bothered by my lift.

 

Not that I can think of. Maybe add some weight I guess.

 

Your truck won't be shiny anymore

 

@tacomatrd22
Here its is. It's as good as he could do.

 

But I love the shiny.

 

Looks great but I was expecting a little more red mixed in. I have to research this.

 

Looks great for an edit though. Doesn't look too bad and it won't break the bank but I need to take a whole week off just to do that project.

 

What would I be looking at for a full oem cv? I tried looking at them on camelback but I couldn't tell what the price was for the entire cv axle for one side.

 

Put my truck to work today.
But I really need to switch my hitch around. It's way too close to the ground.

 

Don't quote me 100% but I believe this is the part number for OEM, the price just looks too low, but the part diagram says it's the whole CV axle for a non ADD diff (which should mean manual hubs).
http://parts.camelbacktoyota.com/parts/1996/Toyota/Tacoma/index.cfm?action=partDetail&section=FRONT DRIVE AXLE&group=DRIVE AXLES&subgroup=DRIVE AXLES&component=AXLE ASSY&partnumber=434300401084&vehicleid=457838&siteid=214329

 

You need a drop hitch badly, trailers should ride flat or slightly nose down at all times.

 

That's crazy. The ones I was looking at earlier were at least 300.

 

You can always call them, it is a real dealership and parts warehouse. I'm sure the guys that are dedicated to the parts site will know for sure.