Mid and long travel installs, tube bumpers, sliders, bed rack’s, cmc's, shock hoops & welding So cal

nice bro! Thats some good work.

 

bump 4 jason

 

Are you tony? I got a new phone and lost all my contacts. I have 75% completed bed rack sitting in my garage with your name on it.

Thanks

Thanks I appreciate it

 

Spent yesterday swapping out bumps stops and suspension on @mahaloTaco truck. As well as a performing a pretty aggressive cab mount chop to fit the 35's we installed. We'll be tubbing his firewall, trimming his fenders in the new future as well as regearing his truck and building a Bedrack for it

Here are the only pictures I had time to take, we were on a tight deadline so we could get it to our buddy at the alignment shop

 

I sent you a pm a while ago. Looking to pull the trigger on some bolt on sliders for my ACLB late December or early January. Would lie to talk numbers so I know ow how much to save up.

Thanks.

 

Today's work, welding a diy CBI Moab 1.0 bumper for @Trobowcop base piece just completed

 

Yesterday's install of a weld it yourself cbi Moab 1.0 bumper

 

So stoked. Clean welds and a great job done.

 

Can you make a simple bracket to mount a 40" light bar to a factory DBL cab roof rack?

 

Hey bro so I have a question in regards to rock sliders. Is it better to have them bolt on or welded on?

 

I can but without access to an oem roof rack I would need you to bring your truck by the shop

 

Honestly it's mostly preference. I'll shoot you a pm tomorrow and we can discuss it

 

Another crappy late night can mount chop, only thing different about this one is that it was performed on a new 2016 3rd gen Tacoma, which utilizes a different style mount

 

Hi Jason. Im in San Diego. I am definately interested in a cab chop. I got 315/70/17 BFG w 4" Lift. (fabtech). Left turns rub tire and turning radius blows. I am also interested in sliders but got a question. I am 5'09" and shrinking w age. Harder for me to get in the truck. I could use some help with getting in. Not to sure if sliders are going to do that for me. Any input from you about other options? You can PM me as well or email. Tx.

 

Ever made headers??

 

I would love too but I'm a little far away. Lol

 

Thanks bro. Im in Santa Clarita so if it easy for me to swing by your shop, I can. Also, if i get the diy sliders, is there a place that you trust that can spray them for me in SCV, possibly?

 

Jason,

Thanks for the hard work you did on my truck to get this done. Really appreciate it.

You drink Beer?

See you Friday to finish things up. by the way ran Rowher 4x4 trail today and it only rubbed once on the body were you are going to do some more trimming.

Chris

 

Looking to get some work done! You available?

 

Sliders can be setup to be used as steps, as far as the cab mount chop goes, that's pretty simple, but most trucks I have worked on with 315's required more than just the cab mount chop to stop all the rubbing, but the cmc is a good starting point as it will definitely need to be done.

Yep, I've built headers and turbo manifolds, don't do a lot of it these days, as their are already so many production headers offered

A few guys I've been building parts for have found a reasonable powder coat shop, waiting to see how a bed rack they are powder coating for me turns out before I start endorsing them.

Thanks, I drink beer. See you this evening

I've been staying pretty busy, but depending on what you need, I can usually fit everyone in.