Raleigh North Carolina and surrounding areas

you leave wine glasses in the under seat storage?

 

Just replaced them not to long ago, long trials and tribulations there..

It's definitely coming through the foot area up front. I haven't cut my feet up yet

 

@PreRunnerSeth

 

Yeah ive been having issues with chopping/cupping driver front tire for awhile. Struggles

 

That looks like it.

 

Figured I'd draw it up.

 

The LEDs should be D1 and D2... L is an inductor.

 

Haha I'll see about changing it. I am using digi key schemeit

 

@Sand Man 2014 I asked my mechanic neighbor about the noise and he said it sounded like a clamp rattling...without looking at it of course.

 

I'll check everything but I think they're all tight.

 

Have you trimmed the body mount ? And or the rear of the front fender(s) maybe fender liner or liner clips rattling ?
Hearing it first hand would be a lot more helpful (to me) to get an idea of direction.

Heard inner tie rods on my junk knocking last weekend on a wash board road, guess I might should look into that.

Had a similar noise in my work van, ended up being a body hole that had been masked over and the tape finally let go on one end, was swinging up into floor at highway speeds. Some. Sort of sound deadening masking that fell off. It's all the way gone now so it's a non issue.

 

When I had my alignment done when I bought new tires months ago, one of the clamps that holds the boot on tierod was left loose and was rattling....it took me 2 weeks to figure it out

 

Anyone interested in voting for my truck? TW 2015 truck of the year.... Or something like that. There is a pole now.

https://www.tacomaworld.com/threads...read-of-the-year.403689/page-11#post-11380610

 

Is mod day still happening this coming Saturday?
@tacopaulo @RaleighTaco whomever else

 

My house.com ?

 

why are most spacers people running 1.25"?

 

Any smaller would have to cut you stock studs.

 

10-4 All I needed to know lol.

 

Kinda like when you taste your own earwax

 

I don't see what a smaller in thickness spacer would require cutting of the studs and 1.25" wouldn't. I'm not a wheel/spacer guru by any means.