1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Canada BS Thread

Discussion in 'Canada' started by OZ-T, Aug 27, 2011.

  1. Dec 18, 2015 at 1:48 PM
    #6921
    VE7OSR

    VE7OSR нет войне

    Joined:
    Dec 12, 2011
    Member:
    #68608
    Messages:
    5,799
    Gender:
    Male
    First Name:
    Rob II
    Okanagan, Canada
    Vehicle:
    05 DCLB TRD Sport
    Armour: All-Pro Skid plates - IFS, transmission, and transfer case. Pelfreybilt rear standard plate bumper, Metal Tech Sliders w/ kickout and dimple die filler plates. Front Suspension: OME 885 + NitroCharger 9000 shocks + 1/2" spacers for a 3" lift. Superbumps replacing stock bumpstops. Camburg ball joint UCA SS braid brake lines Future: ADS Extended length, extended length UCA BJ to increase droop capability Rear Suspension: All-Pro Expedition rear leafs, Walker Evans 27" rear shocks, extended rear brake lines (Wheelers Offroad), U -bolt flip kit, rear Timbren bumpstops. Future: Hammer Hangers, Shock relocate, ADS 12" or 14" shock. Interior: Weatherteck floor liners - front, Wet Okoles- front, ScanGauge, LED interior & map lights. Power moonroof. Exterior: Raider Cobra canopy, retrofit headlight by Insight, LED bulbs all around, modified flasher unit for LEDs. Rear diff breather mod. Front diff vibe problem, driver's side needle bearing replaced with ECGS bushing. yet to install: HID Blazer Fog Retrofit, LED Flood & Spot, + switches, fuse panel. swaybar relocate blocks (build my own)
    CBC is government subsidized, not funded by any one political party. I would think most Canadian people, including CBC employees, can recognize that the CBC would have no influence whatsover on who gets elected president of the United States. Trump maybe a successful business man, but has also shown a weakness in his narrow perspective of the world, as illustrated numerous times by his bigoted inflammatory statements and could be generalized as a typical 'red neck American' view of the world. The CBC, like many other media around the world (in case you didn't notice) have reported on the opinions held by many, that Trump as President would be very dangerous for the US, and a backwards step in general for humanity.
     
    HackD and OZ-T[OP] like this.
  2. Dec 18, 2015 at 2:32 PM
    #6922
    Saskquatch11

    Saskquatch11 TRUCK YEAH

    Joined:
    Apr 25, 2011
    Member:
    #55548
    Messages:
    13,290
    I don't since that would mean the provincial economies in the West have continued on a downward trajectory.
    Albertans have every right to be displeased with federal spending in Alberta, not so much with the equalization program.

    https://business.ualberta.ca/Centre...nts/Publications/155ElectronicApril2final.pdf
    see fig 17, 18, 33, and appendix C
     
  3. Dec 18, 2015 at 2:34 PM
    #6923
    OZ-T

    OZ-T [OP] I hate my neighbour

    Joined:
    Dec 15, 2009
    Member:
    #27584
    Messages:
    50,587
    Gender:
    Male
    First Name:
    Peter North
    British Columbia
    Vehicle:
    Mag Grey 09 Trd Sport DCLB 4x4
    OME 885x , OME shocks and Dakars , Wheelers SuperBumps front and rear , 275/70/17 Hankook ATm , OEM bed mat , Weathertech digifit floor liners , Weathertech in-channel vents , headache rack , Leer 100RCC commercial canopy , TRD bedside decals removed , Devil Horns by Andres , HomerTaco Satoshi
    K Bye
     
    ImplicitlyAlberta likes this.
  4. Dec 18, 2015 at 2:55 PM
    #6924
    HackD

    HackD Marching to the Beat of a Different Drum

    Joined:
    Feb 24, 2011
    Member:
    #51783
    Messages:
    1,053
    Gender:
    Male
    First Name:
    William
    Hamilton, Ontario, Canada, eh?
    Vehicle:
    2010 Base 4x2, 2.7L, 5 speed manual 5-lug Slug
    Gone over the Top for a 5-lug..
    How about this? Why don't we try to focus upon substance, rather than character assassination .. whether focused upon the Left or Right, north, or south of the border?

    White french jesus party? Really?
     
  5. Dec 18, 2015 at 3:07 PM
    #6925
    Sterdog

    Sterdog Offline

    Joined:
    Sep 26, 2013
    Member:
    #113290
    Messages:
    18,435
    Gender:
    Male
    First Name:
    I am Groot
    People's Democratic Republic of Canuckistan
    Vehicle:
    15 FoST
    I feel like I missed a good day in this forum.

    I had to spend $2k to fix my truck after one gas pedal slip and line misread on a hill in snowy/icy conditions :rain:
     
  6. Dec 18, 2015 at 4:54 PM
    #6926
    Sterdog

    Sterdog Offline

    Joined:
    Sep 26, 2013
    Member:
    #113290
    Messages:
    18,435
    Gender:
    Male
    First Name:
    I am Groot
    People's Democratic Republic of Canuckistan
    Vehicle:
    15 FoST
    @OICU812 how about we all agree that we should be less worried about the "white jesus" party and more concerned about the recent turn of events in our own province. Honestly, Ottawa hasn't done anything that I can complain about yet in this election cycle. Trudeau didn't sign anything in France that handcuffs Alberta, he isn't going to significantly raise corporate federal taxes, and he looks to be starting a recession rebuilding budget that is middle class friendly for next year. Notley on the other hand has signed the death warrant for commercially viable middle sized family owned farms, has created a tax that hurts the middle and lower class the most, and has put off the royalty review because it's going to be so painful she wanted some time for the ass numbing lube to set in before the Wildrose get a chance to tear another honest strip off of her anus in question period. Oh, btw, that royalty review is still coming. I doubt she will have even single digit approval numbers come summer. Why should she care though? She gets to keep trucking on for 5 years no matter what the people she represents think. She'll just keep on staying away from town hall meetings on her legislation, plus any other chances to interact with the electorate, and just chum around with her husbands union buddies. No sweat off her back.

    Maybe she'll start wearing some Dr. Dre beats in the legislator so she doesn't even have to hear anything that (edit: contradicts) with her narrow minded view.
     
    Last edited: Dec 18, 2015
  7. Dec 18, 2015 at 5:53 PM
    #6927
    VE7OSR

    VE7OSR нет войне

    Joined:
    Dec 12, 2011
    Member:
    #68608
    Messages:
    5,799
    Gender:
    Male
    First Name:
    Rob II
    Okanagan, Canada
    Vehicle:
    05 DCLB TRD Sport
    Armour: All-Pro Skid plates - IFS, transmission, and transfer case. Pelfreybilt rear standard plate bumper, Metal Tech Sliders w/ kickout and dimple die filler plates. Front Suspension: OME 885 + NitroCharger 9000 shocks + 1/2" spacers for a 3" lift. Superbumps replacing stock bumpstops. Camburg ball joint UCA SS braid brake lines Future: ADS Extended length, extended length UCA BJ to increase droop capability Rear Suspension: All-Pro Expedition rear leafs, Walker Evans 27" rear shocks, extended rear brake lines (Wheelers Offroad), U -bolt flip kit, rear Timbren bumpstops. Future: Hammer Hangers, Shock relocate, ADS 12" or 14" shock. Interior: Weatherteck floor liners - front, Wet Okoles- front, ScanGauge, LED interior & map lights. Power moonroof. Exterior: Raider Cobra canopy, retrofit headlight by Insight, LED bulbs all around, modified flasher unit for LEDs. Rear diff breather mod. Front diff vibe problem, driver's side needle bearing replaced with ECGS bushing. yet to install: HID Blazer Fog Retrofit, LED Flood & Spot, + switches, fuse panel. swaybar relocate blocks (build my own)
    OUCH, sorry to hear. glad no one was hurt (presumption on my part).
     
    MQQSE and DoorDing like this.
  8. Dec 18, 2015 at 6:05 PM
    #6928
    VE7OSR

    VE7OSR нет войне

    Joined:
    Dec 12, 2011
    Member:
    #68608
    Messages:
    5,799
    Gender:
    Male
    First Name:
    Rob II
    Okanagan, Canada
    Vehicle:
    05 DCLB TRD Sport
    Armour: All-Pro Skid plates - IFS, transmission, and transfer case. Pelfreybilt rear standard plate bumper, Metal Tech Sliders w/ kickout and dimple die filler plates. Front Suspension: OME 885 + NitroCharger 9000 shocks + 1/2" spacers for a 3" lift. Superbumps replacing stock bumpstops. Camburg ball joint UCA SS braid brake lines Future: ADS Extended length, extended length UCA BJ to increase droop capability Rear Suspension: All-Pro Expedition rear leafs, Walker Evans 27" rear shocks, extended rear brake lines (Wheelers Offroad), U -bolt flip kit, rear Timbren bumpstops. Future: Hammer Hangers, Shock relocate, ADS 12" or 14" shock. Interior: Weatherteck floor liners - front, Wet Okoles- front, ScanGauge, LED interior & map lights. Power moonroof. Exterior: Raider Cobra canopy, retrofit headlight by Insight, LED bulbs all around, modified flasher unit for LEDs. Rear diff breather mod. Front diff vibe problem, driver's side needle bearing replaced with ECGS bushing. yet to install: HID Blazer Fog Retrofit, LED Flood & Spot, + switches, fuse panel. swaybar relocate blocks (build my own)
    Yes, of course. Are you that oblivious? Can you not 'feel' the subliminal, underlying right wing, left handed self absorbed mentality going on here? Sheesh, have to explain everything to Ding.

    Come back when you have converted. Make penance to the Green party.
     
    MQQSE, DoorDing and Sterdog like this.
  9. Dec 18, 2015 at 6:40 PM
    #6929
    Sterdog

    Sterdog Offline

    Joined:
    Sep 26, 2013
    Member:
    #113290
    Messages:
    18,435
    Gender:
    Male
    First Name:
    I am Groot
    People's Democratic Republic of Canuckistan
    Vehicle:
    15 FoST
    No injuries :thumbsup:.

    Bent spindle, cracked rim, flattened alignment tabs... the usual mess when momentum is directed from forward to directly sideways on the rim. Luckily one of the guys I was with is a mechanic and cut me a bit of a deal. The spindle was about $100, the labour about $600, and the new rims were about $800. So it was closer to 1.5K than 2K to be honest. I could of got away without new rims and just of found a kijiji single, but that would of been a PITA and I'm already running a small spacer so aftermarket rims were a better choice.
     
  10. Dec 18, 2015 at 7:31 PM
    #6930
    VE7OSR

    VE7OSR нет войне

    Joined:
    Dec 12, 2011
    Member:
    #68608
    Messages:
    5,799
    Gender:
    Male
    First Name:
    Rob II
    Okanagan, Canada
    Vehicle:
    05 DCLB TRD Sport
    Armour: All-Pro Skid plates - IFS, transmission, and transfer case. Pelfreybilt rear standard plate bumper, Metal Tech Sliders w/ kickout and dimple die filler plates. Front Suspension: OME 885 + NitroCharger 9000 shocks + 1/2" spacers for a 3" lift. Superbumps replacing stock bumpstops. Camburg ball joint UCA SS braid brake lines Future: ADS Extended length, extended length UCA BJ to increase droop capability Rear Suspension: All-Pro Expedition rear leafs, Walker Evans 27" rear shocks, extended rear brake lines (Wheelers Offroad), U -bolt flip kit, rear Timbren bumpstops. Future: Hammer Hangers, Shock relocate, ADS 12" or 14" shock. Interior: Weatherteck floor liners - front, Wet Okoles- front, ScanGauge, LED interior & map lights. Power moonroof. Exterior: Raider Cobra canopy, retrofit headlight by Insight, LED bulbs all around, modified flasher unit for LEDs. Rear diff breather mod. Front diff vibe problem, driver's side needle bearing replaced with ECGS bushing. yet to install: HID Blazer Fog Retrofit, LED Flood & Spot, + switches, fuse panel. swaybar relocate blocks (build my own)
    :facepalm: Happiness does not come from "If only I had or could..." Happiness is celebrating with gratefulness for what you already are, and can do!" Example - You may only receive one radio station; Be grateful and celebrate that you can listen to the CBC!
     
  11. Dec 18, 2015 at 7:45 PM
    #6931
    VE7OSR

    VE7OSR нет войне

    Joined:
    Dec 12, 2011
    Member:
    #68608
    Messages:
    5,799
    Gender:
    Male
    First Name:
    Rob II
    Okanagan, Canada
    Vehicle:
    05 DCLB TRD Sport
    Armour: All-Pro Skid plates - IFS, transmission, and transfer case. Pelfreybilt rear standard plate bumper, Metal Tech Sliders w/ kickout and dimple die filler plates. Front Suspension: OME 885 + NitroCharger 9000 shocks + 1/2" spacers for a 3" lift. Superbumps replacing stock bumpstops. Camburg ball joint UCA SS braid brake lines Future: ADS Extended length, extended length UCA BJ to increase droop capability Rear Suspension: All-Pro Expedition rear leafs, Walker Evans 27" rear shocks, extended rear brake lines (Wheelers Offroad), U -bolt flip kit, rear Timbren bumpstops. Future: Hammer Hangers, Shock relocate, ADS 12" or 14" shock. Interior: Weatherteck floor liners - front, Wet Okoles- front, ScanGauge, LED interior & map lights. Power moonroof. Exterior: Raider Cobra canopy, retrofit headlight by Insight, LED bulbs all around, modified flasher unit for LEDs. Rear diff breather mod. Front diff vibe problem, driver's side needle bearing replaced with ECGS bushing. yet to install: HID Blazer Fog Retrofit, LED Flood & Spot, + switches, fuse panel. swaybar relocate blocks (build my own)
    You are blessed, two stations! Indulge in what you have!
     
    MQQSE and DoorDing like this.
  12. Dec 18, 2015 at 10:28 PM
    #6932
    Sterdog

    Sterdog Offline

    Joined:
    Sep 26, 2013
    Member:
    #113290
    Messages:
    18,435
    Gender:
    Male
    First Name:
    I am Groot
    People's Democratic Republic of Canuckistan
    Vehicle:
    15 FoST
    We should have a kumbya moment here.
     
  13. Dec 18, 2015 at 10:31 PM
    #6933
    VE7OSR

    VE7OSR нет войне

    Joined:
    Dec 12, 2011
    Member:
    #68608
    Messages:
    5,799
    Gender:
    Male
    First Name:
    Rob II
    Okanagan, Canada
    Vehicle:
    05 DCLB TRD Sport
    Armour: All-Pro Skid plates - IFS, transmission, and transfer case. Pelfreybilt rear standard plate bumper, Metal Tech Sliders w/ kickout and dimple die filler plates. Front Suspension: OME 885 + NitroCharger 9000 shocks + 1/2" spacers for a 3" lift. Superbumps replacing stock bumpstops. Camburg ball joint UCA SS braid brake lines Future: ADS Extended length, extended length UCA BJ to increase droop capability Rear Suspension: All-Pro Expedition rear leafs, Walker Evans 27" rear shocks, extended rear brake lines (Wheelers Offroad), U -bolt flip kit, rear Timbren bumpstops. Future: Hammer Hangers, Shock relocate, ADS 12" or 14" shock. Interior: Weatherteck floor liners - front, Wet Okoles- front, ScanGauge, LED interior & map lights. Power moonroof. Exterior: Raider Cobra canopy, retrofit headlight by Insight, LED bulbs all around, modified flasher unit for LEDs. Rear diff breather mod. Front diff vibe problem, driver's side needle bearing replaced with ECGS bushing. yet to install: HID Blazer Fog Retrofit, LED Flood & Spot, + switches, fuse panel. swaybar relocate blocks (build my own)
    [​IMG]
     
    MQQSE likes this.
  14. Dec 19, 2015 at 5:57 AM
    #6934
    MQQSE

    MQQSE I take naps

    Joined:
    May 6, 2010
    Member:
    #36646
    Messages:
    54,099
    Gender:
    Male
    First Name:
    MooseMan
    Palmer, Alaska
    Vehicle:
    "Stitch" & "Sumbitch"
    Shtuff on Stitch Sticker & Lic Plate Frame on Sumbitch
    Sorry man. :(
     
  15. Dec 19, 2015 at 5:59 AM
    #6935
    MQQSE

    MQQSE I take naps

    Joined:
    May 6, 2010
    Member:
    #36646
    Messages:
    54,099
    Gender:
    Male
    First Name:
    MooseMan
    Palmer, Alaska
    Vehicle:
    "Stitch" & "Sumbitch"
    Shtuff on Stitch Sticker & Lic Plate Frame on Sumbitch
    Feels better in here already. :)
     
  16. Dec 19, 2015 at 9:25 AM
    #6936
    OZ-T

    OZ-T [OP] I hate my neighbour

    Joined:
    Dec 15, 2009
    Member:
    #27584
    Messages:
    50,587
    Gender:
    Male
    First Name:
    Peter North
    British Columbia
    Vehicle:
    Mag Grey 09 Trd Sport DCLB 4x4
    OME 885x , OME shocks and Dakars , Wheelers SuperBumps front and rear , 275/70/17 Hankook ATm , OEM bed mat , Weathertech digifit floor liners , Weathertech in-channel vents , headache rack , Leer 100RCC commercial canopy , TRD bedside decals removed , Devil Horns by Andres , HomerTaco Satoshi
    Nice hair though
     
    MQQSE and VE7OSR like this.
  17. Dec 19, 2015 at 10:49 AM
    #6937
    VE7OSR

    VE7OSR нет войне

    Joined:
    Dec 12, 2011
    Member:
    #68608
    Messages:
    5,799
    Gender:
    Male
    First Name:
    Rob II
    Okanagan, Canada
    Vehicle:
    05 DCLB TRD Sport
    Armour: All-Pro Skid plates - IFS, transmission, and transfer case. Pelfreybilt rear standard plate bumper, Metal Tech Sliders w/ kickout and dimple die filler plates. Front Suspension: OME 885 + NitroCharger 9000 shocks + 1/2" spacers for a 3" lift. Superbumps replacing stock bumpstops. Camburg ball joint UCA SS braid brake lines Future: ADS Extended length, extended length UCA BJ to increase droop capability Rear Suspension: All-Pro Expedition rear leafs, Walker Evans 27" rear shocks, extended rear brake lines (Wheelers Offroad), U -bolt flip kit, rear Timbren bumpstops. Future: Hammer Hangers, Shock relocate, ADS 12" or 14" shock. Interior: Weatherteck floor liners - front, Wet Okoles- front, ScanGauge, LED interior & map lights. Power moonroof. Exterior: Raider Cobra canopy, retrofit headlight by Insight, LED bulbs all around, modified flasher unit for LEDs. Rear diff breather mod. Front diff vibe problem, driver's side needle bearing replaced with ECGS bushing. yet to install: HID Blazer Fog Retrofit, LED Flood & Spot, + switches, fuse panel. swaybar relocate blocks (build my own)
    would the response have been anything similar to "Wear da fox hat"?
     
  18. Dec 19, 2015 at 11:40 AM
    #6938
    VE7OSR

    VE7OSR нет войне

    Joined:
    Dec 12, 2011
    Member:
    #68608
    Messages:
    5,799
    Gender:
    Male
    First Name:
    Rob II
    Okanagan, Canada
    Vehicle:
    05 DCLB TRD Sport
    Armour: All-Pro Skid plates - IFS, transmission, and transfer case. Pelfreybilt rear standard plate bumper, Metal Tech Sliders w/ kickout and dimple die filler plates. Front Suspension: OME 885 + NitroCharger 9000 shocks + 1/2" spacers for a 3" lift. Superbumps replacing stock bumpstops. Camburg ball joint UCA SS braid brake lines Future: ADS Extended length, extended length UCA BJ to increase droop capability Rear Suspension: All-Pro Expedition rear leafs, Walker Evans 27" rear shocks, extended rear brake lines (Wheelers Offroad), U -bolt flip kit, rear Timbren bumpstops. Future: Hammer Hangers, Shock relocate, ADS 12" or 14" shock. Interior: Weatherteck floor liners - front, Wet Okoles- front, ScanGauge, LED interior & map lights. Power moonroof. Exterior: Raider Cobra canopy, retrofit headlight by Insight, LED bulbs all around, modified flasher unit for LEDs. Rear diff breather mod. Front diff vibe problem, driver's side needle bearing replaced with ECGS bushing. yet to install: HID Blazer Fog Retrofit, LED Flood & Spot, + switches, fuse panel. swaybar relocate blocks (build my own)
    LOL Edmonton is nice in the summer along the river. That's about it. I prefer Calgary. I'm impressed it had a four wheeler in it. Those same trucks, in the winter have narrower winter tires on them and snowmobiles, either in enclosed trailers, or up on decks on the box, all headed to sled in the BC mountains.
     
    MQQSE and DoorDing like this.
  19. Dec 19, 2015 at 12:18 PM
    #6939
    Protosimian

    Protosimian Headbanger.

    Joined:
    Oct 19, 2015
    Member:
    #167148
    Messages:
    718
    Gender:
    Male
    First Name:
    Roger
    Where the Wild Things Are
    Vehicle:
    2012 MGM Sport
    Dents and scratches, and other stuff.
    I went to university in Edmonton, and at that time living close to the UofA, adjacent to the largest continuous urban green space in North America, was really nice. As a student, I couldn't afford a vehicle, and the River Valley offered year round recreation on the cheap, as well as good E/W corridor for non-motorized transport. Seems that sprawl has gotten bad in the last 15 years or so, but that seems to happen everywhere.

    Living in Edmonton for 7 or 8 years, I was aware of many of her flaws, and the jaundiced view held by many of her casual visitors, but the City had a warmth and charm that seemed to make itself known to those who wanted to find it.

    http://www.edmonton.ca/city_government/city_organization/river-valley.aspx
     
    DoorDing and VE7OSR like this.
  20. Dec 19, 2015 at 12:47 PM
    #6940
    VE7OSR

    VE7OSR нет войне

    Joined:
    Dec 12, 2011
    Member:
    #68608
    Messages:
    5,799
    Gender:
    Male
    First Name:
    Rob II
    Okanagan, Canada
    Vehicle:
    05 DCLB TRD Sport
    Armour: All-Pro Skid plates - IFS, transmission, and transfer case. Pelfreybilt rear standard plate bumper, Metal Tech Sliders w/ kickout and dimple die filler plates. Front Suspension: OME 885 + NitroCharger 9000 shocks + 1/2" spacers for a 3" lift. Superbumps replacing stock bumpstops. Camburg ball joint UCA SS braid brake lines Future: ADS Extended length, extended length UCA BJ to increase droop capability Rear Suspension: All-Pro Expedition rear leafs, Walker Evans 27" rear shocks, extended rear brake lines (Wheelers Offroad), U -bolt flip kit, rear Timbren bumpstops. Future: Hammer Hangers, Shock relocate, ADS 12" or 14" shock. Interior: Weatherteck floor liners - front, Wet Okoles- front, ScanGauge, LED interior & map lights. Power moonroof. Exterior: Raider Cobra canopy, retrofit headlight by Insight, LED bulbs all around, modified flasher unit for LEDs. Rear diff breather mod. Front diff vibe problem, driver's side needle bearing replaced with ECGS bushing. yet to install: HID Blazer Fog Retrofit, LED Flood & Spot, + switches, fuse panel. swaybar relocate blocks (build my own)
    I thought it would be being having your truck's hood 'teabagged' by the nut sack hanging from the hitch, that would have you backing up.
     
    MQQSE likes this.
To Top