Wheel Identification Please

Can anyone please tell me what these came off of or how I can get new ones? A company wants $165.00 each to refurbish.
Thanks

 

What's your goal?

 

To either have them refurbished or buy new ones?
Cost???

 

Just spent too long googling and only found 1 picture of them on a 1st gen tundra. Any casting marks?

 

I could not find any marks!!!!!!!!!!!!!!!!! Thanks for looking folks....................

 

OP, those look to be off a 4RUNNER. Here's a link to stock Toyota wheels you can play with. I couldn't locate what you had in the pic so I'm not sure if it includes all Toyota wheels or just what they have in stock.

There has to be a cast wheel size on the wheel somewhere, either between the spokes where it is visible from the outside or on the inside of the machined surface. If the tire is on that wheel, you will not be able to see the size. My guess is its on the outside. Tire shops are not going to measure every wheel they handle so there has to be some wheel size on the wheel for quick reference. Good luck, I hope this assists you. That's a good looking wheel. Let us know what it came off from.

http://www.stockwheels.com/c-8788-rims.aspx?section=-5496-5498-&pagenum=2

 

Could plasti dip them unless thats not your thing.

 

There 1st Tacoma wheels. 2001 -2004. Check out craigslist - tampabay. Most of the trucks have those wheels and caps.

 

take the wheel off of the truck and look on the backside of the wheel

 

Thats weird. Ive never seen another taco with them wheels and couldnt find anywhere online but your right.

 

just be careful to double check what you are getting, many companies refurbish rims to "look" like new but they don't all repaint them with a clear coat after and if the aluminum is not clear coated to seal in and protect the polished finish, it gets dull in short order and in 6 months you will be out there rebuffing the shine on them every week to keep them new looking or they turn gray. been there, done that, learned my lesson with refurbished rims.

 

Thanks to all who chimed in on these wheels

 

Those are "gulf states Toyota" wheels, they were either port/dealer installed and not really a "factory" wheel. Any dealer from that region should be able to get you a part number. In the Denver region we have to order them from a southeast dealer, not from Toyota parts depot.

Edit: Made by Enkei if I remember right.

 

Yep it was Enkei, that region was also famous for making up fake TRD trucks with the wheels, flares and stickers but no locker.

 

Old post I know, but I have the very same wheels on my 2002 Prerunner.

 

I have these wheels on an '03 that I think was originally sold in Florida. I like them.