AZ BS Thread 2.0

Finally got Sam's Oznium LEDs on yesterday. When using the turn signals, they hyper flash. When using the hazard lights, they don't hyper flash. I'm assuming I would need resistors but I have no idea how I would put those in series with the LEDs. Also, what size resistor would I need? Should I just take a multi-meter and read the difference in resistance?


@snowtank They are awesome! We'll get some pictures today for you. We're already planning on ordering some more.

 

Yep. Just checked the garage- they are available.
Located in Chandler.

 

Get an Electronic Flasher instead of the Relay Flasher. Pull or Research which one they need. Go to parts store and get same plug style with Electronic on the package. Install, always same flash rate. Won't indicate light failure anymore though. That's what I did on my Runner and my 1st Gen Taco.

 

The truck or the lights? These LEDs just had wire at the end, no plugs or anything.

 

1st mod done. Needed to respool/tension the winch cable and install a hook. OR pull the heavy ass dangerous cable and run my synthetic rope with safety thimble on. This makes 3 different rigs this rope has been on (1st gen Taco, buggy, Power Wagon). The safety thimble won't work as needed on the buggy rebuild anyway.

 

The truck. The flasher is on the backside of the fuse panel under the steering column, I think.

 

So just replacing that will fix everything?

 

Yup.

 

Well shit. That's easy enough! Thanks dude!

 

Thats bad ass. Yeah I got some from my twss I just need to order my "toyota" lettering from bamf and I have everything to tackle my grill project. Text me the pics when you get them

 

http://www.oreillyauto.com/site/c/d...713&categoryRedirect=01546&pt=01546&ppt=C0117

I'm not sure if her's is the 3 pin like this, but it should say something to the effect of Electronic or LED.

 

thats so awesome man. Super excited for you Ryan! cant wait to see this beast!

 

Thanks dude. I'm convinced the tweakers down the street are frequently WTF! Spooling out winch rope down the street, different vehicles in the driveway all the time, different dogs going apeshit at them. LOL

 

I might have something I want to test too

 

Anyone on here do hydrographics for a living or maybe know someone who does?

 

You mean hydrodipping?

 

Yeah same thing. I believe the technical term is hydrographics but yeah basically dipping. I had a guy in the Midwest that did phenomenal work but he closed up shop.

I've got an idea brewing in my head that just won't go away. Lol.

 

Which one in Peoria? Everything we do for our trucks is retarded expensive so I'm used to it! Haha.

 

Get on the book of faces and add unique custom Coatings and more. Sebastian is a TW guy although he doesn't get on much. He responds fast to FB messages.

 

I don't do the FB thing but I'll have my other half get in touch with him. Thanks for the tip.