What Have You Done To Your 2nd Gen Tacoma Today?

Going to finish in the morning, 1 thing to point out is they are not EXACTLY the same length of wire inbetween so 1 side has more slack than the other. Good thing to point out is they are the EXACT width of the bottom of the rail system. Im not to confident in their waterproofness but some silicone here and there oughta fix it. Also it comes with a wire that plugs into the 4 pin trailer harnes which i do not have nor do most/all of you. So i lopped that thing off and ran it behind the tail lights and under the truck for now im not sure what i want to do switch wise. In the bed or in the cab. Or maybe a switch that only activates when the tailgate is open.

Anyway here are some pics.

whole bed
i put the front and back ones facing down and the 2 center ones facing the other side of the bed since the wheel well would cause a shadow that would throw my ocd out of whack
driver side with only slack in the center length

Ppassenger side with slack inbetween 2 of them

need to tidy em up but thats where i ran them and theyre currently ziptied underneath the bed till i decide how i want to switch it

Oh and the "try me" light thats wired in the box is seperate, so technically speaking its a 9 led panel setup if you wanna mount and wire this other one up with it lol. And each panel has 15 leds in it. Any other questions and ask em.



idk if you can see but each corner also has predrilled holes with a cone ish shape for screws. And the package supplies screws. But they also come with pre applied 3m squars on the back

 

Go check your mail i also had this issue and received mine today

 

I'll check it tomorrow. It's 1F outside and I already put on my leisure wear. LoL

 

Great pics!! Thanks.
Does the 3M tape seem like it will hold up? I have it on the back of the strip I used and it didn't really stick even though I cleaned the rails really well first.
.

 

LMFAO I am going to look now!

 

Not today, but over the course of the last week. Pulled this trailer from MO to KY with some just a little big of stuff in it and pulled it back with a piano and a bunch more stuff. The truck pulled like a champ. Gas mileage SUCKED, but I knew that was going to happen, so oh well. She made it both ways and I'm happy about it. Oh and the first night I was in KY I pulled a guy out of a ditch. So she did some work there too. I love this truck!!!

 

I didnt clean mine ... lol so we will see. But it was super difficult to pull the backing off so i have faith. It is also legit 3m product

 

Last I heard from Bob, I was on the list for next batch. I'm sure the holidays put everything off a bit.

 

Skivvies and slippers??

 

Got my power tailgate set up on my aux on my fob so now when I lock or unlock my doors the power tailgate does not respond unless I go to my aux then it works

 

Power tailgate??

 

Ya remote lock and unlock

 

Ya remote lock and unlock

 

My fob doesnt have an aux

 

Replaced my plasti dipped badges with black sand pearl emblems. I know it's not a big difference but there's no peeling or corner chipping. Photo is plasti dip on top and bsp emblems on bottom

 

Do you have a trunk button or you can set it up to your passenger door so when you hit the button twice for the passenger door that will unlock it and lock when you hit the fob for lock

 

Where are people putting their tacomaworld decals? Just got mine. To many choices!

 

Back window. Did you have to request one or were they just mailed out?

 

Anxiously waiting on my Tacoma world sticker as well. Can't wait for it to arrive! I'm hoping that mine's in the mail since it seems like a lot of people got theirs.

 

I honestly forgot about mine and one day it showed up! One of my favorite mods so far. I feel so official lol