Deeezy's Locked Sport Grocery Getter Build

Well chit I thought about doing 4.56 with mine but if that's what you're running idk then

 

Where I live it's pretty hilly, not San Francisco bad, but it sure isn't flat. Also my tires are heavy and I don't rotate them as often as I should, so that contributes to rolling resistance. I also don't drive all that fast, but when I do get on it the truck launches. I can say with my modded heavy pig I smoked a stock 2016.

 

Cause 3rd gen sucks haha

 

Cause they don't have the bottom and mid range our 4.0's have.

 

That's right

 

Sure thing. I'll snap some pics first thing tomorrow morning.

 

Thanks bro, greatly appreciate that.

 

hows the road noise on those mud terrains?

 

A tad bit quieter than KM2's but still hums like a MT. It's better on bad wet roads than the KM2's, I'm thinking it's because of the siping.

 

cool, still deciding between those tires or mtr kevlars.

 

I was going to get MTR's but it was hard to get in a 315 size. Iven had told me that his MTR's got really slippery in the mud at Peacock Flats. I like how the MTR's look though. I have no complaints with my MT2's pretty good all around. You never really know unless you actually try them out though.
If I can get my hands on some 35" MTR's, I wouldn't mind trying them out for my next set.

 

@BajaRunner Here's some pics of my firewall:











Mine was rubbing right above the cab mount bushing bolt, so that's where I concentrated on.

 

Wow that's quite a bit of lovin to clear.

 

This is with caster maxed out at 4 degrees. To be honest, once you mount your 35's, it kind of forces you to clearance everything. You don't need to pound everywhere, just where the tires mainly rub at full lock/stuffed.

 

Got my rock lights mounted and wired up. I got them on a 3-way switch, on with the dome light when you open the door, off, or always on. I used only 3 lights per side since I already had an LED strip under each door.

 

Looks really good

 

Thanks man. I was worried about the factory dome light dimmer being able to dim all these lights, but being all led, they're not even pulling 2 amps. So all is well.

 

I'm wanting to do this

 

Those lights are ORO Light Spots. If I didn't already have led strips under the doors, I would have mounted 4 Light Spots on each side.

 

At least you know those light strips are holding up well!!