W59 Transmission Info

Does anyone have any info on a W59 transmission? I have looked high and low on this transmission and have came up with nothing. I have asked a few members individually, and they are willing to help but will take time. I would like to have some info before I take it apart....which is this weekend!

 

What specifically do you want to know? I took mine apart.

 

http://web.archive.org/web/20101127014333/http://ncttora.com/fsm/1996/96_repair_searchable.pdf

Here you go have fun.

 

tacomas were out in 1992? @ 0:21

 

Except for the guys incessant coughing every 10 seconds, thats a pretty cool video.

 

Just things to check before and after taking apart, stuff like that. It looks to be a fairly simple trans from the outside.

 

Thank you that's pretty much what I was looking for.

 

I even watch this one!

 

My tip would be when you are pulling out the screw plugs and then the interlock pins and lock ball, pay special attention to which order they come out in and where they go. I found that the manual was not great for telling me how to put it back together.

 

https://youtu.be/o-pImSXzBVs

 

Yeah I read that part it said just to go in reverse order to put back together! Lol really??

 

Assuming it just goes back together the same way. I haven't teared into mine yet. Keep us posted on how it goes.

 

It's coming apart nicely so far!

 

Dat skull..........

 

My supervisor

 

don't forget to check your synchro gaps

 

Thanks be sure to do that!

 

just use something like 800-1000 emery cloth to polish it out. youll hook the emercloth around that shaft and spin it however you can. this should give it a good even cut/polish. at work we put a crank on a lathe, start spinning it and put a crank polisher on whatever pieces we want to clean up.

 

Less then 30 bucks I can buy a new one.