Two Icon 650lb rated coilover springs for Toyota Tacoma

For Sale:
Two Icon 650lb rated coilover springs. part #158504
Came as part of the Icon Stage 4 suspension system.
Had to change to heavier springs due to extra weight of, front bumper, winch, skid plate, sliders, etc.
Excellent condition. No rust or wear.
Three years old, 18K miles on them.
Normally $120 ea, will sell both for $100.


Thanks.
Q~

 

What did you end up going with ,if you don't mind saying

 

I had to go to 700 lb springs from ICON.
I love their suspension systems. I just needed more spring to prevent the front from bottoming out on big G outs.
Q~

 

Would be willing to throw these on with the new 5100 fronts I have but I need to know how much these would lift from the stock springs. Not looking to pre-load them much or at all with the shock collars.

 

Count me in pending that info

 

Thank you , I love it also been thinking about upgrading also, did you go with 13 or 14 inch

 

Hello Everyone.
I'm just guessing here, but I would say that the #650 springs brought the front up about 1.5" to 2".
I did not add the Icon Kit to raise the truck. I bought it for the ability to run rough wash boarded roads and handle G-outs at speed.
The extra lift was a result.

FYI I can run 33" tires just fine with the #650 springs.
Q~

 

I understand ,I have the stage 3 with 650 springs and it's starting to sage with the plate bumper , skid plate and with addition of a winch may upgrade to another to 700 hundreds

 

Hey if it helps...
I'll take some measurements tonight when I get home.
Height. Inner and outer circumference.
Any other measurements needed?

Q~

 

I have a really good shop here in CA and we discussed the options, took measurements, and spoke with Icon several times.
The consensus was to go with the #700 springs.
I'm glad I did. The front end came up about 2" to where is should be, and the ride is not noticeably rougher.


Now it's time to go attack some of those roads that would cause the front mud flaps to drag on the G-outs.

Q~

 

Questor I am a noob but do you what the stock springs # are at?

 

Hello 20bmr15.
Unfortunately I do not know what weights the stock Toyota springs were rated at. I would guess 600 to 650 pounds.
Sorry I can't help more.
Q~

 

Thank you for the information, nice setup y the way

 

Thanks. My truck is my Bug Out Vehicle when I need some time to myself out in the desert or the mountains. It's a high speed off road RV.
Q~

 

Shoot me a pm with the lowest price you'll go. I don't wanna make an offer and offend you if I go too low.

 

Hey.

Sorry for the delay. I have been traveling...

Here are the measurements:
Height = 13"
Inner diameter = 3"
Outer Diameter 4 3/8"

EW-

 

Can you pm with best price?

 

Don't think these are for you my friend. These are for a coilovers system, the springs you need for the 5100's taper down where the sit on the spring perch, these are flat, top and bottom of springs. Free bump for OP

 

Still available? I'm 40 mins from Diamond Bar

 

Still available. Sitting in garage all shiny.
Q~