2016 tacoma lug nuts

Does the 2016 trd sport Factory Alloy wheels use that style with the built in washer or use a standard Acorn Lug? Looking for black lug nuts that fit trd pro wheels.

Here is a pic of one with washer

 

Where did you find those black lug nuts?

 

So the 2016 have the ones with the washers?

 

Found it at wheeler off roading..

 

Nice, Ive been looking for these for a while!

 

I want to make sure these will fit. I know they are 2 differnt types. But I need to confirm it.

 

Yea, for Toyota factory wheels, you need this style with the washer.

 

So all tacoma no matter what year has this same lug nut style and dimensions? I will probably order it.

 

Just look at your wheels. If the mounting surface where the lug goes is flat, it will take a mag style lug nut, which I have seen all of the Toyotas (2006 tacoma, 2010 4runner, 2010 prius and 2014 rav4) that I have owned have.

 

I tried these they fit but kind of loose and its a little shorter. Its not snug like stock lugs. I was told its better to have it snug for safety reasons. If anyone can find black lug nuts that fit please let me know.
thanks!

..

 

Did you happen to take a measurement to compare the stock lug nut length?

 

I had mine powdercoated black. $2/lug

 

90942-01077 are the black ones from Toyota if anyone wants factory black lug nuts.

Jeff

 

thx. I'm finding these at 5-6 dollars each.

 

I spoke with Josh there and he said there should be no issues and he's not aware of any fitment issues.

Has something changed w/ the 2016's?

 

Hi Jeff. so these will fit on with the trd pro wheels on the 16's? Just making sure before I get them

 

Yes, they should fit the TRD Pro wheels.

Jeff

 

Thanks Jeff! Do you know if the inlet below the washer should be snug in the hole or is ok to have some play before tightening it down? I was told it should be snug and have little play. T

 

Heard from Josh again, he said TRD wheels may have an issue with fitment as the hole
is a bit different than stock. Did you try them(wheelersoffroad) on stock or TRD wheels?

 

I tried it on the trd pro wheels. The gorrilla lugs fit which the inlet below the washer fits into the hole. The place I went to told me it has a little play which is not to good on hubcentric rims it should be snug. I'm not sure if that is true though.