What Have You Done To Your 3rd Gen Today?

I am using these for reverse lights:
Philips 921 White Vision LED Back-up light

Philips 921 Bright White Vision LED Back-up Light, 2 Pack

http://www.amazon.com/gp/product/B00P2D41OQ?psc=1&redirect=true&ref_=oh_aui_search_detailpage

I see better with these.

 

That's right! Go Jets Go!!

 

do you mean from the front of the bed? are you trying to figure out how much bed space is lost? the rotopax are only about 3 inches wide so I suppose the stick out three and a half at the furthes point when the thing is actually mounted. when I get the mounts il know for sure for you.

 

Those were actually the ones I was leaning towards as well.

 

I have a plastic contico in the bed and leave about 6 inches from the back so the lid can open. Just curious how much room is needed to clear the hi lift.

 

I ordered the Husky WeatherBeaters, OEM Door Sills, Plasticolor Mud Flaps, and the Truxedo Tailgate seal.

 

I ran out and faced the cold, this is the furthest it sticks out.

 

Did some work today!

Installed an LED maglight on the drivers seat, weather seal on the tail gate, got my Cap hitch all set, installed the swing out toolboxes I ordered, put in my OEM bedmat, and did a foam insert for the toolbox and cut out spots for all my capping/hiking gear.

 

How hard is it to install the swing case? Do you need to cut into the OEM bed cover?

 

Looks great, nice work!

 

No cuts to the OEM cover. You use the bolts from the little storage boxes (lose those little guys) and then they supply self tapping bolts for the hinge piece. Four bolts each and it's set.

 

Thanks!

 

Nice hitch cover, I approve! I have the same, but not putting it on until my lock shows up.

 

That's clean.

 

Sweet thanks!

 

I bought two different locks and neither fit for whatever reason. This works for now!

To further prove my nerd level, I submit an R2D2 car charger in my cup holder and an xwing HUD as my screen off option.

 

Link?

 

you from winnipeg?

 

Pretty sure this is the Maglite it's been a few years since I picked it up:

MagLite - ST3D016 Maglite LED 3-Cell D Flashlight, Black

http://www.amazon.com/MagLite-LED-3-Cell-Flashlight-Black/dp/B000IXAJVY

Quick fist clamps:

$10 END OF ROAD Original Quick Fist Clamp for mounting tools & equipment 1" - 2-1/4" diameter, 2 Count (Pack of 1) - 0010

https://www.amazon.com/gp/aw/d/B000CQPANY/ref=yo_ii_img?ie=UTF8&psc=1

 

Installed h11 LED headlights from superbrightleds.com. Ive been hearing a lot of negative reviews with LED's on headlights but i figured id give it a try.

Definitely brighter than stock. Its more white than the drl's as well. I noticed the beam was immediately lower than stock when i put it in so i had to raise the beam back up a little. Hopefully i dont blind anyone tonight when i drive it.