a few Retrofit questions?

Retrofits should be here Tuesday. But tomorrow the truck is getting lifted with new shoes and exhaust

 

You got a lot going on in the next week or so!

 

Fire/ems Christmas check came in and some money from family, and saving for 6 months haha... but it will look real good when I'm done

 

Is your home station anywhere in Gainesville?

 

I'm about an hour north of Gainesville. I work EMS in Franklin nc, and fire in rabun county

 

Pro Comp 7005 with general grabbers at?

 

Yep

 

Ok so im at a loss. I have wired HIDs before but never converted to H1 from H4. I bought an H4 wiriing harness for the HIDs. Now heres is my problem

Relay harness has the correct plug to plug into my stock harness

also has 2 extra wires for the Hi/Lo i assume go to the projectors

Now when i plug in as is, i get only HI beam when i turn my headlights on with just the bulb connected. if i turn my low beams on the bulb goes out.

If i combine the Blue and Red (i assume switch and power) i get Hi and low from the bulb

But if i connect the projector to the Blue and Black as its supposed to be, the projectors stay in high beam mode even if i switch the switch inside (i assume since i ran power from the Red to the Blue, this making it constant on.)

Black is netural on the harness.

any ideas?

 

Ok, so there's four plug ins. Two on each side. The black and blue goes to your ballast. The red and black goes to your high beam.

 

got it figured out.. now it's raining so I can't finish install today

 

well got a couple hours of clear skys... so aligned and now resealed... waiting on extra silicone seal to dry... but I work tomorrow so it looks like it will be Sunday if weather likes me or not..

 

Still need to adjust up and down and out or in a little. Now that i can park a little bit further away.

 

How are you liking them so far?

 

Love them.. Much better than stock! Would do again in a heartbeat.. a friend of mine wants a set in his dodge now.

 

Wish i would have done an outer ring on the shroud LED halo, just to give it some offset color in the day because it really is all black in there. But other than that they are great, i do need to clean the outside of the lens' and polish them

 

Open them back up and do it

 

LOL i may in the summer, i found a finger print on the inside of the headlight housing last night.. so my OCD may make me do it haha... But currently its 15 Degrees outside.. and dont feel like spending the time to take them off and bring them in haha..