Mid travel overland-wheeler build with 35's and BS w/ SAS in the works

Or buy SPOD from pelfrey Has a mount, has all connection wires, has relays, and comes with switches. Even comes with spade connectors with heat shrink for your power ends on accessories

 

I wonder how much more is needed trimmed to clear 35's?

 

I'm looking at that too........ literally right now.

 

You should be pretty close to clearing as far as the cab mount goes, maybe a little closer to the body mount

 

I'm wanting to get that but it's more than likely going to have to wait. The $$$ isn't there right now with all my other things I'm needing. I am going to get a sPOD one day though no doubt

 

Ok body mount now how does yours look? I'm wanting to keep it clean...

 

Do it and don't look back, In the end it really isn't that much more compared to a do it yourself deal. Its 350ish, maybe less depending on where you look but when it comes down to buying the breaker, the fuse panel, the relays, the switches, the wiring, and a mounting plate to have it look decent it really isn't that much in savings and the time I wasted doing it diy isn't worth it imo

 

I was just told in the 3" lift and 35's thread to take it all the way back to the bushing plate? What is that?

 

Not clean lol, I haven't had a chance to get another plate welded up so mine is just open for now. I want to just relocate it back and tub

 

Its that plate with the 2 bolts, on top of the cab mount

 

Take a look at it and see the oval shaped plate that is bolted to the mount. Take it all the way back to it. On mine I think we trimmed a bit of that plate off as well.

 

Well fawk I got a little ways to go...

 

I did get my other patches installed. Just waiting on 2 more to show up. One from @Rattletrap66 and another from a website I like to shop from.

 

I think we did about the smallest CMC ever on my truck and I don't come even close to hitting it. I think it's due to the TC UCAs and having max'd out caster. Depending on your tire BS you might not need to cut more.

 

I was going to try and rotate the plate when I do my bushings so I can cut more

Eh your pretty close, couple mins with a grinder and you'll be there

 

I'm going to get 3.5" BS F-5 wheels

 

Should have this coming @DoorDing posted it and looks very useful

 

Roger. Not familiar with fitting that size wheel so I'll wait for your results

 

yes I saw someone use some rubber that I want to say was vinyl garage floor liner

 

Yeah @deeezy did! Can you post some pics in here buddy?