What Have You Done To Your 3rd Gen Today?

Im looking for this one, but the main guy here on this forum who make custom ones doesn't have it at the moment...anyone know where I can find this one (without the flag though)?

 

@aweddle14 I am going to just run it from the headliner down to the A pillar then to the glove compartment and finally to the 12v outlet. This is how I wired my Highlander with the other g1wh dashcam.

 

thank you sir!

 

Thanks, what do you suggest best method to take the factory ones of by?

 

i just used a heat gun and heated it a little or a hair dryer and started a corner with my fingernail and just peel slow at a 45 deg angle if it splits just start that corner and catch it up. Don't heat too much or it will leave glue behind.

 

Thanks again.

Been years since I did mods to my Tundra, picked up this thinking no mods, and two days later it's started.

 

extra lights or anything i mite add thats 12volt

 

Washed the salt off before we get more snow tonight

 

I had made this for my F250. Cut it down to fit the Tacoma. The pictures are before I sanded the cut sides down, it looks better. 15 layers of fiberglass. Hold my XDS .45 good!

 

It is also gray out if you have your car accessory mode

 

Springfield XD?

 

Yeah, the XDS sub compact.

 

great job

 

Thanks for the pics, does it come close to rubbing anywhere ?

 

What LEDs did you pick?

 

I debadged the WHOLE truck--Tacoma emblems, SR5 emblems, V6 tailgate emblem, all UNNECESSARY stickers from glove compartment, bed liner, etc., and removed the dealer added pin-stripe. Added mud guards, Raptor 4" SS ovals, Weather Tech mats (F/R), and Tacoma door sill protectors. Have had several people ask me what brand was my new truck. Did the same thing to my '12 Tundra.

 

Close to 3500km so far (Canada eh?)
Removed the air dam, after some highway tests I've seen no decrease in my fuel mileage.
Interior LEDs just arrived today.
Got the tool box for Christmas.
120 PSI compressor in front of the battery.

Dual Trumpets and tank (Kleinn HK2) mounted behind the grill.

Button (Black) and Compressor toggle (red) wired in.

 

My 1st Taco...I had an '07 Tundra that I loved...However, I am really starting to like this one and setting it up the way I want.

3" lift & 5100's

285/70/17 BFG Muds
Leer Cap
BPF Skid
Grill RAD on order

 

Have you been around Wilmington Ave and Del Amo? I always spot a MGM with a black tool box very identical

 

I just ordered one from eBay. How hard was the install