MARYLAND TACOMAS

Okay who is our resident gun Smith? Lol

 

What'd yah break?

 

Nothing my 308 is acting up. Trying to figure out why but I don't know enough about the uppers on my own.

 

A few casings from today that didn't want to leave the gun lol got caught halfway out. It seems to be short stroking but I don't have the know how to mess with the upper or the gas blocks. Did it in two different brand new mags. And the bolt feels like its getting hung up on the star chamber....

 

I need to install a ICON Add-A- Leaf 1.5" pack on to 2015 TRD Pro to level my truck out, and looking for a good place to have it done. Cannot do it where I live as my development belongs to an HOA. I have done other minor work there without issues, replacing the leaf pack might raise some questions, so looking for a good shop to have it done. Any one have suggestions. Another option is to ask if my dealer will install it.

Thx

 

Could do a mod day meet. Its a little chilly so who here has a garage?

 

Oh,... crap
That happened on extraction?

 

Well on the failure to extract but yes. On quite a few casings but all of them were flattened in one spot.

 

These weren't rapidly fired either. So somethings up. Its gotten caught on the star chamber a few times when trying to rack it.

 

do you have a go/no go gage
was it factory headspaced
does it get stuck going into battery

 

No gauge factory built, and not going in. Sometimes the bolt doesn't strip the round off the top to feed it though but doesn't get stuck when it does grab one.

 

This is fairly normal, the crimping however, is not.

 

While we are on the gun subject, lol. Anyone want a brand new 22lr conversion drop in for their AR15? I'll take about 180 from you guys. The Mag will be "gifted"

 

Md. Shooters Forum---Ed Shell, whatever he tells you is gospel!

 

A couple of us were looking at the pictures of the cases, it's probably short stroking

Here's a thread over at the 308AR forum that sounds very similar to what your describing.

http://forum.308ar.com/topic/8965-armalite-ar-10-short-stroking-cycle-issue/

 

Are they really that picky? I have an HOA, but they don't really fuss about stuff like that. Just as long as your car isn't on blocks for 6 months it's all good.

 

Hey guys. Reaching out today to see if anybody has a set of wheels/tired I could use for MD inspection. Recently moved here and the current set up didn't pass. Gladly compensate whoever has any to let me use for the inspection or a cheap set to buy. I am located in 21229.

 

I gotta set of steelies-n-tireds but NO tpms's, which wont effect MSI

 

ok, took to long to respond, I renege.............