How to change this part

ayyy guys was wondering if anybody could identify this part that is out of place looks like a rubber gave.

 

Can't open the pic.

 

Looks to be your swaybar end link.

 

lower ball joint or sway bar link end . pic is a little dark

 

So is it a simple replace or would I be better off taking it in to a shop?? got some shops that charge a arm and leg to get stuff done out here

 

Yea sorry bout the darkness will try get a better one in a bit

 

You can learn to do it yourself. There are how vids to help you.

 

If you have a jack, jackstands, and a few tools the job is pretty simple.

1: Jack up each side of the truck and support with jackstands.

2: Remove end links

3: Install new end links

4: Lower truck form jackstands.

 

No need . is it the larger one you talking about or the smaller one ?

 

Thanks everyone @Gwarden! Appreciate it. Any suggestion on type of end link? Don't wanna grab a pos..aftermarket

 

maybe edit the pic and use PS or Paint to make a circle around the part you are referencing

 

Whatever they have at your local auto parts store will probably be fine. Good Luck!