New England B.S. Thread

DARN! They must be, that's the only explanation I could think of because I've looked everywhere and can't seem to find it.

The search continues. Thanks guys for the help! At least I have some type of part number to go by!

 

Let's hope this new bearing is the fix and I won't need to do it myself.

 

Just got the truck back from getting the EXGS bushing installed. Wow, there is a lot of slop in the stock bearing. The driver side matches the passenger side for play. Also saw a Tacoma with some nice retro decals on it tonight heading north on 93, just outside of Manchester around 4:30. Anybody on here?

 

Is someone looking for one of these?

 

Yes @Cativelense is.

Morning everyone

 

Morning all. Guess who still hasn't started their snow blower....

 

Kind of bummed we're not getting much snow. Wasn't to try out the new bfgs in deep snow.and my wifes atw's in snow in general.

 

Where has @BostonBilly been?

 

He bought a jeep

 

Do we need to pull him out of the woods somewhere?

 

I know but he's still a nice guy, he just made a bad decision.

He could be stuck out on a street at anytime too....

 

Just dropped my truck off at Bernardi Toyota to get the needle bearing checked out. Last few weeks been hearing a weird oscillating noise coming from the front end but can't place left or right. Hopefully it'll be covered by the TSB I've seen floating around. I tried some of the indicators it mentioned like switching it to 4wd, and it goes away just like it says. So that's what it is.

 

RIGHT HERE!!! You got one for sale? I really only want the plastic trim pc, but if it comes with the hazard switch, then all good.

 

It does come with the Hazard switch, but its the useless 2015 model type, I replaced it with a 2013 type with the clock. It's just a toss in.

I was going to put it on eBay today. Other I have seen go for $150-175 with scratches, mine is without, so i was going to start it at $150. Dealer has them for $283 plus tax. For a fellow TW member, I will let it go for $100 shipped.

Let me know.

I also have my stock 2015 Non-JBL NAV, Sirius, Entune head unit in new condition.

 

I have a 2014 that didn't have nav, so I upgraded it to a nav unit thanks to a TW member. The nav unit has a clock on the radio display, so I thought it was pointless to have two clocks. So I did a swap with another TW member this week while I was up in Boston for work, my clock unit for his non. Busted a clip popping out my hazard unit so that's why I was looking into replacing my bezel. Like to have things as close to new & in good shape as possible.

I think that high price you've seen might be because that pc only comes as part of the radio assembly itself, I think. I've searched high and low and can't seem to find it sold separately. At least not the exact one (OEM). I'll take it off your hands. Worst case scenario I have an extra non clock hazard pc to trade for something else, or sell. PM me how you want me to pay and we'll make the transaction. Thanks a lot!

 

Got out of work at 8am since I don't work tonight I decided to start the storm off with an 16oz Mai Tai. About an inch of snow already

 

Got the go ahead on the needle bearing TSB! Scheduled for next Saturday and looking forward to that weird vibe to go away.

 

Worst thing about this weather is the temp. Seems the snow wanted to freeze faster than my defroster could melt it.

 

I try not to run the defroster when I'm driving, it always just seems to create a nasty mess on the window when it's snowing. I just use the regular heat and the wipers to clear the snow

 

Just got back from picking up pizza. Holy stupid people batman. There's nothing more than a packed snow surface and you'd think it was 2 ft of snow. People driving 10mph on surface roads, 25 mph on the highway. Saw 5 cars stuck just trying to go up the quarter mile hill to my street just spinning tires not going.anywhere. That's the crap that causes accidents. And I had to reheat our pizza cause it got cold.