What Have You Done To Your 2nd Gen Tacoma Today?

Thanks!
Amazon 12" flexible strips. Under the dash and under the back of the front seats. Posted some pics a couple of days ago in here.

Been a favorite of mine for a while. I just hope the movie doesn't mess it up! I did my center caps in the DP logo too.

Thanks!
Dremelled the opening exactly the size of the "ring" around the stock cup holder and shoved in a 3.5" boat cup holder off of Amazon. Few bucks, I think. I may plastic weld it in later, but it sits snug and flush right now.

 

Sonofabitch

 

Sonofabitch

 

Sorry man, it may clear itself after it dries completely

 

Nope. Says it is private.

 

alright changed it to public i hope that fixed it.
Was curious what my suspension looked liked off-road, so i took a video thought yall might enjoy it.
-OME 886 coils
-LR UCA
- 33s

 

Damn taped off the trim and everything. Nice! Come do mine next

 

Found a temporary place for my switch while I wait on my NSA Box.




Also ran my CB Antena cable properly.

 

Got the idea from a member on the ifish forums. Made a rod rack for the roof of my canopy. Still have some finishing touches to do such as wrap the contact surfaces to prevent damage to the rods and line and rig up something better to hang the forward end of the longer rods. The 10'6" rod on the right is too long to maneuver into both rod holders.

They are paver frames from Lowes shortened to fit the width of the canopy. It is held onto the carpeted roof with the "hook" side of velcro which is adhesive-backed. I also installed a 3/4" wood screw with a washer under the head on each end of the paver frames. I really think that the velcro alone would hold just fine, but I went ahead with the screws for added stability. I screwed into the area near the existing bolts that attach my roof tracks.

 

I won't say "properly". Proper would have been thru grommet and silicone for potential leaking or air.

I will say at least you taped the hole to attempt any fraying from happening.

 

The only way I ever clean a MAF is with alcohol and a Q-tip....very carefully.

Double check the connection....making sure it's completely plugged up. Then I'd disconnect the negative battery terminal for about 15 mins to try and reset the ECU. If that doesn't help and it stays in limp-mode...you may be out a MAF sensor.

 

Properly, is referring to not having it strung across the cab and out the rear door. It was a temporary setup while wheeling last weekend.

 

Does this allow for speedometer adjustments? And what is the blend mount?

 

Just bought my 2010 DCLB last week. Went a little plasti-dip crazy today. Did my rims, center console, and the housing around my window controls. Love the black on black. Excited to join the forum.

 

Finished installing my lift.

 

Awesome looking truck.. good to see another long bed here.

 

Did the 20k service. Mobil 1 synthetic and Toyota oil filter. They were on sale, 2 for 11 bucks.

 

Greased my u joints, flushed the tranny, motor and rear diff oil. Also changed out the spark plugs. I put the rest of her back together tomorrow.

 

New TRD off road decal!!

 

New Shift Knob