What have you done to your Tacoma today? 1st Gen Edition

I had to use a toothpick to bend the little copper pieces inside to hold the LED bulb base. It's not super tight but I think it will hold.

maybe they are for a switch (ECT, Clutch Start Cancel)? OORRR the 2-pole is for the keyring light (option package for '99-00)?

 

That's what I would check ^^^^ since the 99-00 came with the keyring light. But if its manual check to see if the clutch start cancel works

 

not all of them, only the ones with the package for convenience lights

 

Pretty soon it'll be part of people's build threads

 

Where are the plugs located exactly? Sorry if I missed this.

 

I'd go with red if it were me.

For all the reasons you just listed.

 

Psht everything I do goes in my build.

 

Clutch start works!

I'll do that today!

 

"Filled up with 93 today, truck is basically race ready."

 

Behind the kick panel kind of behind and to the left of the steering wheel column by the diff lock dimmer etc.

 

Dimmer and locker work?

 

Yep...well my diff lock light blinks but I know it's engaged!

 

Sweet! Fuckin Pantera!

 

Like these two?

1st one is right where you are talking about. The second, smaller one, is below the steering column. Never figured out what the first one was so I cut off the connector and used it for my illumination/dimming hook up for my switch panel. The second one seems to be for the ignition ring light (which I do not have).

Although when I tested the second one, it was always hot. With the door jamb switch on or off, didn't matter.



Here's a pic of the wire colors for the clip above

 

FYI, for the first clip pictured (under the diff lock):

G-R for positive, G-W for negative. And it's controlled by the dimmer knob/switch.

 

Changed oil, bled rear brakes, tinted markers.

Ordered custom green SS brake hoses from OCTaco!

Cant wait to get those suckers installed.

 

I need help with my exhaust, I want to eventually get Dug Thorley headers.

The problem I have now is just the position of the exhaust tip. I also dont like this giant round can of a muffler from toyota.

I need to replace mufffler to tip...any thoughts?

 

Weird I wonder what it could be for!

Yeah those are the two!

 

Does anybody have a lead on some colored vacume lines and hoses? I want to do plug wires green and green vacume hoses.