Florida B.S. Thread

Not a fan but it works

 

I figured

 

Looks dope but too heavy for my liking.

 

@xweslingx

http://www.pirate4x4.com/forum/toyo...tube-bed-exo-build.html?nocache=1453914338056

 

Oh yea silverback. His full build is on rock solid toys. He's got dana60/Toyota hybrid axles.

 

BTW thanks namm

 

im so freakin lost, about to give up on this wiring....i completely bypassed the fuse box for the time being just to see if I can get the headlights working with the switch...nothing. the wiring is exactly the same as what the FSM says but the ONLY lights im getting are the momentary highbeams....nothing else.

 

Maybe a bad switch?

 

nope, because the way I had it previously wired up worked perfectly fine. The issue was that the fuse wasnt a complete circuit, that 3rd wire coming from the headlights was just supplying power to the lights. Then there is a red/white wire coming off of the column wires that is SUPPOSED to go to the relay BUT I had it connected to the low beams and thats how I managed to get the switch to work. but now with it wired up like factory....its not working like it was

 

@Timbo89 get you one of these, they are bad ass!
https://youtu.be/tXA1eVxxlRM

 

How much. Don't have time to watch full video

 

$479, too much lol, it's bad ass though. eliminates need for switches and a fuse box

 

man, I need to step away from this, im 2 seconds away from ripping this fucking harness out and throwing it in the trash....it is seriously pissing me off. I. do. not. know. what. is. wrong.

such a waste of $260.............

 

i'll pass it to @Black Horse if that's cool with him

 

Just calm down. Walk away and come back to it later. Don't do something that you will regret later. Post up the complete diagram of the harnes and the wires coming out of the lights and your fuse box. We can try to take it one step at a time.

 

What type of harness do you have? Year of the truck and model please. Then hold up a bit so that I can research it a little.

 

just toss it in the trash, it will save you from thinking about it, those idiots don't know how to make a wiring harness.......

 

i just feel like all of this effort I put in to get this thing running has just been thrown in the trash and has been all for nothing. I understand that this is a "Universal" harness...but I figured everything is there, just figure out a way to adapt it to the pickup. But this is just infuriating.

ok....I would...but heres the issue.....JEGS is completely useless and doesnt have ANY diagrams of the harness they sell.......they only give you examples of OTHER diagrams to go off of. Thats the most frustrating part of everything here....I have nothing to base anything off of

 

No don't throw it out we can work through it.

 

its a JEGS 20 circuit universal wiring harness and it's going into my 1980 pickup 4x4

oh i agree with you there....this makes no fucking sense.....