NW WA Meet / BS Thread

Probably well oiled would be ok. Not excessive use. Good point though.

 

Be careful running air tools on 150psi. A lot have max psi's of 90. Not sure what you'd get out of co2 but no small compressor is going to give 120 psi anyways. Sure they could pressurize a tank to that but no way will they run any tool at that. There's a reason you really need a 80gal 2phase compressor to get the most out of air tools


I'm lazy and didn't want to deal with remembering to refill co2 so I went with the arb. Plus I can fill other people and not feel like it's costing me money lol.

Though co2 is nice and fast!

 

And I've been thinking, I know 2000+psi is alot, but running an impact for 10min off and on, wouldn't that drain the tank pretty quick? Considering how much an air compressor cycles during normal use, I'd imagine using up at least 2000 psi in a few hours (or less) with air tools.

 

That's what a "regulator" is for. Your tank may contain 2000+psi, but the regulator necks it down to your preset psi.

 

Howdy Mike! We actually went to Lester in the Fall (right at the beginning of elk season). I think the funnest part was going from Lester all the way to 410. I need to start up the Garmin to dig up those tracks but it does make for a fun day outing.

 

His price is same as all pro ones off ebay. And I didn't see kickouts

 

Yes I know what a regulator is. And pretty much every off the shelf co2 setup that's marketed for offroaders (that isn't super expensive) has a fixed 150psi or 250psi one.

 

Anyone want to get rid of or trade their 2010+ led tailights with cash on top?

 

Soooo no one wants to wheel? :-(

 

Viair here, but going to do OBA of some sort

 

Pending my leaf spring swap. Where do you have in mind?

 

Finally going to put my UCAs on. Can't stand seeing them on the bench any more!

 

Got it! Works good, just only use the hard yellow hose. If you use black rubber, it will melt.

 

I'll just put this here. "Use a bigger hammer".

 

Do the springs and UCA's on Saturday and let's hit a trail on sunday!! And idk where..

 

Whaaaa? Me not get it! Or do you mean to beat the pivot bolt out? To hit myself in the head with?

 

I just got some "alternative" tools tonight so we'll see what happens.

 

Yeah and "more pry bar"

 

Let me know! I don't have air (obviously) hahah but I'd be down to go get atuck!

 

Not fancy, but functional and cheap. http://www.superflowair.com/mv50/