Keystone State Thread

haha if it was for my tacoma id consider it, but its actually for my girlfriends Subaru, and i dont think she wants to drive that far.

I actually have a lot of plans for my truck this summer and some of that JBA stuff is appealing, so i may be inquiring in a couple months.

 

I go to NTB in Bensalem - they know how to align for the lift.

 

Ehhh so your still a little over 400 =/ one day snorkel you'll be mine lol

 

Sounds like its Dennis birthday? Happy birthday man!

 

We need to meet up here soon even if its just for lunch

 

Just remember you said that.... I may just pick up a shift at the squad. Hehe

 

Anybody was in phylli on collowhill yesterday

 

Just ordered the same snorkel. Did you run into any issue with the install. I'm curious what these minor modifications were.

 

They want you to use a 3 5/8"hole saw I used a 3.5" hole saw but it was a wood bit so it was tough. They also want you to drill five 5/8" holes. I used a 1/2" bit used my dremmel to enlarge the hole and used a air die grinder as well. I also had to cut some out from where the air hose goes into the engine bay. Pulled the washer tank out for more room. Cut the factory air hose to fit the pipe they supplied. I got a 3" HD plumbing connector from lowes but could've went with the regular one because I had to pull the metal off the "HD" coupler. I used a 1/8" bit for the three holes in the pillar instead of using the plastic inserts I also picked up a heat gun to try to make the snorkel fit better but don't think it helped at all because when I tighted the bolts it pulls the fender to the snorkel. Where are you at? If you have any questions or need any help let me know.

 

https://www.tacomaworld.com/threads/snorkel-installation-2nd-gen-ss135mod-1st-gen-ss170hf.141141/ I also had to do what the 3rd post did but mines a little different. I'll take a pic tomorrow as I'm installing my light bar

 

https://www.tacomaworld.com/threads/snorkel-install-on-05-tacoma.90308/ another I used as reference.

 

welcome to the neighborhood! i'm up on dexter st

 

all this gun talk makes me want to get in the basements and press a few out

 

awesome man! Im on Silverwood street about two blocks off of Levrington. Good to know theirs some other Tacoma guys in the neighborhood.

 

Thanks man I appreciate it.

 

Kinda hard to see but you get the idea if yo need anything else let me know.

 

I wonder who that misc is that made the snorkel thread

 

Go on....

@HCTacoGuy so far I've seen a few 3rd gens in town, none were black though.

 

Why not buy a snorkel kit made for the Taco?

 

Here is a better pic