Tire size for 4" lift

I want to run a bigger tire on this '08 double cab long bed with 17" rims. What tire size would look good with this size lift?

 

37x12.50

 

At the very least.

 

Uh

 

37's may be a bit tall...

 

Shhhhh

 

44's

 

:O nah id go with 40" toyo open country M/T's. Hit up bj baldwin for some!

 

But really OP, it's really a personal choice but look at 285/75R17. about 33.8 tall and 11" wide. not sure if they will fit rub free though.

Edit: probably should go with something in the 285/70R17 or 33" range realistically.

 

Guaranteed to rub like a crack ho at a Las Vegas investment bankers convention.

 

that's what i was afraid of. don't want none of them 'round here.

 

Id say some 33"s or a tad bigger.

 

Zactly what rub points are eliminated with some lift?

 

I believe moderate lifting of the truck eliminates fender/ inner fender rubbing, but cab mount chop is recommended with 285's, and spacers eliminate UCA rubbing but may add to cab mount rubbing. Pinch weld mod is also in there somewhere too, although I don't know much about it.

 

I have a 6 inch procomp lift. 325/60/18 . they rub the sway bar, and the fender very little.
Not sure the spec of the wheels.

 

Lift won't prevent inner fender, cab mount, and pinch weld rubbing. It may change when the tires rub during suspension articulation but that's about it.