What you need to know about lifting a 2016 Tacoma - Presented by Toytec Lifts

Thanks for the help Jerry! It looks like Wheeler's Offroad has some pretty good prices on the shocks as well as their aal is there anywhere else I should check?

 

Wheelers is pretty good, but you might try Down South Motorsports as well. Make sure to let them know that you are a TW member as I believe you'll get a slight discount

 

Looks great! Do you by any chance know the coil spring rating for the kings? Ive emailed King but haven't heard back yet. I'd like to add the hidden winch when the parts are available for the 2016 so heavier than stock would be great.

Edit* Anyone who is curious Downsouth Motor sports was nice enough to give me the info. They come with 600# but can be swapped with either 650# or 700# for no addition fees!

 

Check out jet.com. I got my 5100 bilstein rears for only $110 shipped with their promo code. I'm sure the front ones are cheap too. A few people on TW have gone through this site for 5100s. Good luck!

 

Thanks for the advice I'll check it out!

 

Please do! Waiting anxiously. I have a boss lift in the garage waiting to be installed. I also have FN FX Pro wheels arriving Friday. I am adding the exact same tires. Please post pics.

 

I've got King coilovers, TC UCA and an ICON AAL setup sitting at home waiting on me. Will end up doing a Cab mount chop to it as well to make sure my 285s aren't rubbing. Hoping I wont have any issues overall. I have King 12" smoothies on the way as well

 

will a tire that's 33" overall have any rubbing issues? it's a 285/70r17.

 

Can somebody please tell me the part number for the UCA bolt. I have tried searching thru this thread but haven't had any luck. Thanks!

 

ordered from Amazon for $36.40 shipped with tax.

 

thanks!

 

Quick question. Planning everything out. Is it pretty much assumed that one should expect to have the front needle bearing issue when lifting 2 inches in the front? And the fix for that is the east coast gear bushing? Thanks.

 

Got mine at the dealer couldn't find the part number either. 34$ for 2 bolts

 

I didn't have the issue. Seems rather hit or miss. But yes, that's the fix.

 

Did a bunch of trimming today. Seemed to resolve the rubbing in all but extreme conditions. I'll be doing the CMC as well to be thorough. I could lift the front another 2 inches, but Id rather the truck ride closer to mid travel instead of close to full droop due to increased preload.

 

what size tires? and what was the actual height and width?

 

285/70R17 KO2s. Not sure on the actual height and width. I do have a couple ways to correct rubbing though. CMC or bring the front up a bit. I'd rather keep it where it is and do the CMC

 

reason I ask is cause I ordered Mtz radials, 285/70r17 and didn't want to have to do the CMC. I'm doing a full OME lift. says your width is the same as mine, but the Mtz are slightly taller.

 

You should be fine honestly. You'll likely get more lift than I have now. I could go without the CMC now, but I'd rather get it done and know that there won't be any rub at any point of the travel with the wheels locked one way or the other.

 

I'll find out next week when my wheels and tires get here lol. installing my lift Friday.