South Carolina BS thread under new MANAGEMENT and lives in SC

Ok cool. So now you need 35's. Rpm isn't bad. I'm eventually going with 4.56 gears though

 

im looking but also thinking 37s i have the room for them

 

Do it

 

This will actually raise your rpms a little on the hwy to around 2800-3000, your off the line and off road performance will improve though.

 

yes i am

 

Just ordered wheel bearings from nj636, have the ECGS bushing, and LR balljoints should be here soon. Almost ready for an alignment lol. @ahspurlock

 

They're not grinding yet. More or less doing it as preventative maintenance.. The last one I did I had a shop press the bearing in and I wasn't quite happy with it from the start. I'll keep these as spares. There is some noise when I turn but it's not bad.

 

If you're doing everything else and gears are in the budget you might as well.

 

Already had a discussion with NJ going and I think NJ is a little cheaper if you buy a pair, I haven't compared recently. I think for a single bearing they are the same price.

 

Yea should be, use same parts, process is the same, both guys own Toyotas and want to help us out. I just checked and best I can tell NJ has the jump on a pair.

 

No doubt. Mine all started cause my rear springs were worn out and needed to be replaced. I figured I might as well lift it. You can see what happened from there

 

We need another meet in Columbia before gulches

 

You guys should come a little further south... Nicer weather down this way.

 

look for a meet spot

 

Battery Park Offroad for a pre-Gluches meet & wheel. Stretch out some suspension and stuff some new 35's...

 

I hear Charleston is real nice for meets.

 

I hope so...

 

I mean we have a nice brewery that has a pretty nice parking lot for parking and drinking! Holy City brewery and you could get your pluff mud fix!