FS: 16x8" Five Star Wheels - New Wheel from FN Wheels

Thanks I'll run it without for a bit. Damn tire shop scratched the area by the lug nuts. Grrr made me mad. But gave a discount on the tires and free warranty. Not really noticeable unless you come close.

 

Five Stars 17x8.5 with -6mm offset and BFG A/T KO2s 275/70R17. Arrived at FedEx office in SD ready for pickup 24 hours after ordering.

Dustin, your customer service is on point man. Thanks for the wheels.

 

Just picked up a set of 5 FN Five Star wheels in bronze, 16X8 -25mm offset last night. They're getting wrapped in new 285/75R16 Duratracks today and should be on the truck this evening. Super stocked for the new setup, will post pics soon.

 

I love the bronze wheelies!

 

One step closer.... Thanks to @Ghost848 for getting these mounted up for me!

 

Any updates? I feel like I've been pretty patient.

 

Do you need E/T length lug nuts for these wheels?

 

Lol..... sorry to keep you waiting, I don't have any real good pictures to post yet but will put up what I've got. You should be fine with regular length lug nuts I believe, I already had extended studs due to my last set of wheels and there was just enough thread depth in the "Gorilla Nuts" I'm running to torque them down. Loving the new wheel and tire setup so far!

 

How many inch lift?

 

Sitting on a king mid travel set up, not cranked very high. Between 1.5-2" maybe. I'll get measurements tmrw from hub to fender flare. Fender liner trimmed and cab mount chop done.

 

Do You think I can get very similar stance as that with 0 offset?

 

Honestly I'm not 100% how that will effect your stance. This is my first set of wheels for the tacoma, so not a lot of experience with wheel offsets/backspacing appearance on the truck.

 

Anyone have these on a stock suspension 2016 with stock OR tire size? Looking to just widen the stance, wanted to know if any trimming is required. I don't have mud flaps and won't be putting them on.

Edit: ok so I finally read through every single post on this thread and it looks like the 0mm offset option is recommended for a stock suspension setup.

 

Offset is not that critical. BACKSPACE determines how much the wheel sticks under your fender. Too much and it will rub your shock or UCA in the front. It's easy to measure but no one gives it or knows what it is. It's the distance from the back of the rim to the flat where the wheel mounts to the hub.

 

FN 17x8.5 Five Star in Matte Bronze

275/70/R17 BFGoodrich KO2's

ToyTec Boss 3 inch

Total Chaos UCA's

 

Sharp truck! Do ever get rubbing with the stock suspension?

 

@alfordr67 I did not with stock tires.

 

Is this the -25 or 0 offset?

 

Mine are -25 ones

 

Thanks, looks better than I thought it would on a stock suspension.