(626 & 909) TW Members

Hahahaha I will measure today and you will have the answer by about three. So you want me to measure the bottom seem of the door panel to the floor?

 

I typically see people pop a bead more often than break a wheel.

 

How bad would it be for your truck if you waited a week to get it aligned after replacing shocks? I would assume not bad but idk

 

Get a buddy to help with a quick toe adjustment and then you can get an alignment when you have time.

Measure front to front rim and write down measurement. Measure back to back of front rim. The front should be right around 1/32" to 1/16" shorter than rear.

 

They need a smilie that has an over my head motion lol
Cause that went right up and over

 

So weird. I just sat down after spending the last 3 hours doing alignment on our train wheel bogie assemblies. They all gotta be 1mm toe in adjusted by the tension of the side guide wheels using shims. And their are 14 of them to do per train.

Bogie assembly


Our tools a long straight edge and depth gauge.

 

Roller coaster?

 

I'll draw it. Sounds difficult with words.

That is a sweet rail assembly!

 

Nothing but the best at Disney

Yup. California Screamin coaster at California Adventure

 

You could just move closer. Then you could just show me, lol

 

@4x4Banger do this to the rim lips on the front wheels. The front should be about 1/32" shorter than behind the rim. Use the adjustment on your steering arms. Equal turns on both sides so your steering wheel doesn't go sideways. It is a little hard to measure on the tires.

 

Nah I'm not a big fan of LA traffic, lol. 6 years was enough for me.

 

To be an engineer sounds like it would be pretty interesting work there. Get to use expensive parts. Come up with crazy designs that are different.

 

If you are ever interested. I know the the Director of design and engineering pretty well. Could get your resume directly to him.

 

I will watch a video on it when I get home and see if I would be able to lol

 

You work on cars also ?

 

Only go over there if they need help when it breaks. It's one of the rides that has a dedicated maintenance crew just like screamin so they don't need help very often.

 

Good to know. I wouldn't mind jumping to a different company. I'll dust off my resume.

 

Hey guys, I need help planning out a Vegas trip. Basically just asking if anyone knows of a cheap hotel on the strip. MOTEL 6 is cool, but it's a little walk. Any help is appreciated.