Uses for Bed Cubbies

Doesn't help that your cap leaks and traps moisture in the bed all the time

 

What an awesome idea! I've been trying to figure out a good way to keep my gas can from moving around. Consider this idea stolen!

 

This is what i do. I keep 4 of em in the small door next to my plug outlet in the bed. 7 bucks n change for 4 straps at harbor freight and damn do they come in hand alot.

 

Like most of the others, I keep bungees and other tie-down gear in the covered ones, since I added the swingbox on my driver side, I had to take off the cover from that one in the back, but the box sort of covers it. I'm planning on wiring in a combo 12V/USB socket unit that's made for motorcycles into the rear cubby behind the swingbox with enough slack in the cable to get it out onto the tailgate when I need it (partly because the one over the wheelwell is tough to reach since I put on the topper).

I've got a weather-resistant 12V "lighter" socket in the open one over the wheel on the driver side (aux power circuit is run off a custom switch inside the cab), the Pass side is tough to get much in/out of since my Hi-Lift is mounted along that side of the bed below the tie-down rail so I don't use it for much

 

@Pistol Pete is who i got it from

The little d-rings came from tractor supply. But you can get them on Amazon or ebay we well

 

I keep strappies in there, since my bakflip keeps moisture out.

 

If anyone has any tip or a write up for a lighting mod that would be much appreciated!

 

Those make a great gun vault too