Pelfreybilt Off-Road

For those that have sliders, do you see an advantage with top plates? Do you wish you would have got them in hindsight if you haven't?

 

I wish I had them. For the dog and the women. And I hear they shield a little from mud and dirt

 

Agreed, dog almost broke his leg the other day, jumping out of the truck. Might look in to some sort of attachable plates

 

I also pick my dog up to get out when in my truck. Not worth taking the risk

 

I ran a 15/16 through the shackle mount. It worked out nicely for my Crosby 3/4 shackles. The shackles would have fit in there without drilling. But it would have been a pain to remove them.

Took about 5 min on each side. Watch that torque, through. And follow up with some spray paint.

 

@deadhed61 Awesome..!! I sure wish I would have ordered the drop down table. @Pelfreybilt can this be added after, if so what would I need to know and do..?

 

you can add it on after if you can buy the kit from them. Just need to drill holes for the hinge and the 2 support cables, and then tack on 2 short pieces of threaded rod to hold the table up in the stored position and you're good to go!

 

ready for my bumper, only 8-10 weeks to go!

 

I've been waiting 15 weeks now, still have another couple weeks to wait until they are here... starting to get impatient!

 

Oh the joys of being sick but need to get stuff done.
I had an issue with my light bar so that goes on later. Winch is bolted in and wires ran for now. But the heavy part is done.

 

Question - for my 13 I no longer have anywhere to secure the bottom of my grill. What have you guys done?

 

Mines been that way for 3 years.

 

I just used Zipties on the back of the trim piece to hold it in.

 

Yeah, that's something I keep forgetting about. I bought Tyler's first front plate bumper waaaay back, and it's been running with nothing to secure it with no issues this whole time! Haha.

 

Anyone with a Pelfreybilt front bumper have a list of the hardware? I need the size of the long bolts for the brace part of it

 

Since it doesn't need to be a specific size I would just go the largest you can fit. But just by looking at mine it looks to be a 8/10mm × 120/130mm. I can measure in the morning if you want, I was just too lazy right now as I just closed up the garage. It's beer:30

 

Thanks! Lol I got the length from Satin on FB, 4-1/2". I believe 3/8" dia.

 

Ok got it lol

3/8-16" x 4-1/2"

 

I was close damn close.

Go metric. Less tools to find when needed

 

I decided to use the 2 holes off to the side to ziptie the bottom of the grill for my 13. Pretty stable.