Does transfercase have a mount?

Hey guys does the transfer case have a mount or does is it simply attached by the connection to the tranny?
Im asking because I have 2wd and cant go under to look.
THanks

 

Usually just hang off the tranny

 

Okay cool. I'm piecing together a conversion vs buying a donor car and by doing it that way I'm afraid im going to neglect some small parts
and have to run around when doing the swap.
This answers one of my questions thanks

 

On 4WD trucks, the rear mount is attached to the TC, instead of the tranny.

 

Mine looks like it's supporting the tranny, not the TC.

 

hmmmm, on my old hilux (gear-driven TC and G52 tranny) the mount was on the TC. I assumed it was the same for the Tacomas. You could be right. Looking under there, its hard to tell where the tranny ends and the TC begins.

 

So it seems some are supported at the Tcase some at the tranny

 

it's raining otherwise I would go out and see but I think it's mounted on the rear of the trans just before the TC "bell housing" if-you-will

 

could always go nuts and make one of these

 

Haha! I know they sell those.
Is that extra support for it? Or does it also hold up the tranny?
I work with a water jet so if I really wanted to I could try and make one lol.

 

https://www.tacomaworld.com/threads...er-case-in-the-2nd-gen-truck-write-up.345652/

https://www.tacomaworld.com/threads/transmission-swap-write-up-s.384303/