6" zone off road

Who has it and what do you like ans dislikw about it

 

Just an FYI, Zone is either made by BDS or is their sister company, I forget. I have their YJ springs on my CJ5. They were cheaper than BDS, which overall is a quality company.

 

I have the zone 6 inch kit. No complaints here, I am about to swap out my stock struts and spacers for extended length bilsteins and eibach coils up front. I got zones nitrogen charged shocks instead of gas charged shocks for the rear. I did a lot of research before buying and seems like all the full size truck guys swear by there nitro shocks

 

What's your tire and rim size combo and types

 

i have the zone 6" as well. great kit.

 

Helo he878 18x9 rims with 295/70/18 (34.5 inch) trail grapplers. Hopefully swapping rims to some 18x12s during the summer.

 

how far away is your tire from your spindle? i have the same lift and the same rims (except mine are 17s) and im running 285/70/17s and i have 1.25" gap between the tire and spindle and i want to run some tires that are 12.50 wide, but i was concerned about the tire possibly rubbing the spindle.

 

Any particular reason your going from 18x9 to 18x12

 

I plan on movin to 18x12 setup soon myself. The 18x9 just aren't wide enough for me

 

im talking about the width of the tire not the rims.

 

I haven't measured but it is pretty close to the spindle I say at least 1.5 inch away like you. I would think you could run a 12.50 depending on rim width? Idk hit up the main 6 inch lift thread we have and the gurus can shed some light.