All-Pro Tacoma Slider Group Buy - CLOSED

PM me the model slider and year of your Tacoma and I'll get an answer for you this afternoon.

Tracy
tracy@allprooffroad.com

 

Checking on the status with the shop now. I'll let you know shortly!

Tracy
tracy@allprooffroad.com

 

You need 4 holes drilled on the bottom of the frame on both sides, totaling 8 holes. It's pretty easy though... I bolted the sliders on the existing holes on the side of the frame, which put the sliders exactly where they need to be... Then I just piloted and drilled through the bottom holes that all pro designated. You'll need to remove brake line clips to move the brake lines to reach on the driver side. On the passenger side there's a box holding some electrical stuff, take the two bolts out of the frame and let the box hang, bolt it back on over the slider once it's in place.

 

Thanks man that's what I thought.

 

Came home to this today... Better than Christmas! Thanks again to AP and everyone in the group buy.

 

I am curious. I test fit the sliders yesterday. The instructions CLEARLY say they want a gap between the sliders in the pinch weld at the bottom of the cab and you might need to grind down the pimch to get the clearance you need.

After mounting them up, it looked like there was PLENTY of space between the slider and the pinch. Has anyone needed to grind down the pinch for clearance?

 

I'm sure it's going to vary for every truck.

 

Anyone know where to use these plates? Came with my apex sliders for a 2016 double cab.

 

Strange I didn't get those

 

Got them installed and they are seriously BAD ASS!!

 

Got my sliders Friday! also picked up @MattLikesTacos sliders as well!!

 

Got mine on Thursday with Jeremy (@Ostrichsak)!!!! Even though they're just the standard ones, these things are T-O-U-G-H tough!!! High quality bends, welds, and steel! Can't wait to get these bad boys welded on when I get back in the U.S.!!

 

Tracy got back to me within the day. They sandwich between the slider and frame where there's a bend. I noticed this during install but wasn't sure.. Makes sense now.

 

You mean towards the back? I put mine on without having them. Got a pic of where?

 

HOW DO I ALWAYS MISS THESE!!!!!!!!!!!!!!!!!!!!

 

aww man. i was just looking at these sliders on the allpro website and wasnt going to buy them because they were a bit out of my budget too bad i didnt see this earlier, maybe next time

 

I didn't get these either. Hmmm.

 

I called Allpro today and they told me that some sliders have that piece already welded in. Mine do. It's kind of a filler plate located near the front of the slider where it bolts to the frame. Very near the angled piece that bolts to the crossmember.

 

Mine were welded in. 2015 for me.

 

Yup looking at the pic of mine you can see them welded on at the front.