What Have You Done To Your 3rd Gen Today?

Yes you do I used the 3m molding tape and then just cut it to the letters with an exacto knife

 

Ok great! Thank you!

 

Do you have a site, name and I know with some of these grill sites they have lots of options for paint. What did you get flat black with gloss? Any info would help. Thanks

 

Did you get your sliders?

 

Which grill is that!!??

 

A toyota engineer said in an interview on youtube that this "front chin spoiler" equates to a saving of 2 mpg. Let me know if you notice it.

 

I have not noticed a change in MPG once I removed mine, I am on my 2nd full tank, will follow up.

 

What size lift/level do you have?

 

What's the process like for getting the old stickers off? Spray with soapy water and just go at it with a fingernail? How about putting the new ones on?

 

I have to ask with your interior lights! Did you have any issues? I heard that the LEDS have been blowing out peoples systems and ruining their gps screen. Please let me know if you know anything about that or have had any issues? THanks

 

Here is my last major mod. A Century Hi-C shell. I had a bunch of left over body-trim from my last project so I decided .. What the Hell! ... and trimmed out the skirt of the shell. I also took off those crappy Century Emblems and added some genuine Made in USA flag emblems. The Century emblems had a big "C" in the middle and I'm sure it wouldn't take long for one of my old C-130 buddies to ask: Say D! What does that "C" stand for ... Cock*****r? My last mod will be a Curt Hitch ... when they get around to producing the "Plug-n-Play" harness. The Century Dealer told me that Toyota was stalling the project over Patents or something?

 

I installed the map, dome, and license plate lights on Saturday and the four for the vanity lights last night. If something like this is to occur, I will let you know. So far, so good. And thanks for the head's up, because I had not heard that, nor were there any negative reviews on the product page [Amazon].

 

Apply some heat (either on a hot sunny day OR a blow dryer) and peel with finger to remove. Very easy to take off, with very little reside left behind

 

Drove mine to vote this morning

Going to order some Wet Okoley seat covers here in the next couple of weeks. Thinking some ShrockWorks sliders as soon as then come out with a 2016 version.

 

those rims are screaming to be DIPPED!

 

No rubbing on mine...

 

It's the OME suspension lift. 887x coil on 90021 soft strut with the headstrong AAL in rear. nitro gas shocks all the way around. Running a 17" wheel with 285/70/17 nitto trail grapplers. It rubs slightly on the drivers side while turning hard. It's a little over 2" lift

 

On a new vehicle, the stickers peel right off. Older vehicles take some work because the sun kind of dries out the sticker and it will come off in small pieces. I used 3M adhesive remover to get the rest of the residue off. (Which wasn't much). To put the sticker back on, I marked the tonneau with chalk at the start and stop of the sticker and hoped for the best! It came out perfect(that never happens for me!)

 

That looks like an older Tundr with that cab

 

I'm sorry but to me that body-molding looks awful. Makes it look like an 80's American truck. Again sorry but to each his own I guess.