I'm Lifted !!!!

Installed ToyTec 3" (coil/AAL) kit yesterday. Using my Bilstein 5100's (front @ zero) and included Light Racing UCA's, Toytec Diff drop and OME CB drop. Turned out beautiful I think. Ride is like stock.

 

Congrats. Just did mine also. Feels good to get it done!

 

Start listening up for the grinding hum that should start soon now that you are lifted. It will be your Driver's side needle bearing in the front diff. I would also get rid of the diff drop as it does nothing for our 2nd Gen Tacoma's. Looks nice though

 

Looks good. Did you do anything in the rear? Lets see pictures.

 

kit included aal's also i had the 5100's in rear

 

Looks great! When you say Toytec 3" lift w/ 5100's are you referring to the toytec coils? Did you use any spacers for lean or extra lift?

 

Very nice!!

 

Can I ask what the advantage of replaceing the UCA's on a basically new truck is? I see so many people doing it on here but didn't know what you gain. Ride quality? Better off road capability? I'm sure someone is gonna blast me for asking so I'm prepared. haha.

 

Any time you go above 2-2.5" with our trucks, it starts getting difficult to retain a near-spec alignment. Aftermarket UCAs such as Light Racing, make this possible. Some people opt out of replacing the UCAs up front due to price, but if you're going to be going near 3" and above, it is recommended (as most will agree)

 

I got ya!! Thanks for enlightening me!

 

Kit came we top plate spacers which take lift to full 3" inch. I think they are 1/2". I have them on both sides.

 

Well done , looks good dude. ...

 

OP can you post a link to which toytec lift you used?

 

I had the 5100's on previously then added the below kit along with LR UCA's

http://toyteclifts.3dcartstores.com/NEW-3-Lift-With-front-coils-rear-options_p_233.html

 

Looks great - glad to see the 265/75's fill up the wheel wells just right.

 

He doesnt give a shit what we think...

 

Added the TRD center caps !!

 

Sub'd