Console Vault for 2016?

Hey all,

Are there any companies offering a console vault for the 2016 Taco?

 

http://www.consolevault.com/toyota-tacoma-floor-console-2005-2011.html#.VkT8OvmrShc

2016 not available yet.....

 

I've been in contact with Bobby at http://www.lockerdown.com/
He's suppose to be getting a console from the plant to do some testing. No time frame on when they will be available right now though.

 

Anyone know if the dimensions are close enough? Thanks

 

No.

4Runner looks close...
http://www.consolevault.com/Toyota-4-Runner-2010--2015_p_71.html#.VkiwqnafPIU

 

Just go an email from console vault stating that their vault for the 2016 Taco is now shipping:

http://www.consolevault.com/Toyota-Tacoma-2016_p_139.html#.VtitmPkrJhE

 

I'm interested in seeing what the install is like.

 

Interested

 

I think I'm going to pull the trigger and get one. I have seen them on other vehicles and they are top notch. I'll post pics of install when I get it.

 

I just ordered one. Will post pics and report also.

 

This will be my third console vault and I can vouch that it's a quality product.

 

Anyone get their console vault installed yet. I was curious as to how people are getting the console lid apart to get to the hinge to take it off. I removed all the screws (I believe it was six plus the 2 for the latch) and couldn't get the top and bottom halves to separate.

 

These are the instructions for the 2nd gen, but maybe 3rd gen is similar?

http://lockerdown.com/instructions/2012.pdf

 

I had a 2015 and had a console vault in it. It is definitely not the same.

 

My console vault for my 2016 arrives today. I will post up some pics and let you know how the fit goes. Hope to put it In this weekend.

 

2016 limited dcsb4×4.Installed hers (that's right)yesterday. Nice fit,lost maybe 0.5 inches.5 minutes to install.Console vault

 

Any tips you can give about the lid removal?

 

Original console lid removal? No lid removal.Just open the console all the way,tilt the vault towards the front of vehicle and side it in.Bolt it down and you're done.Literally less then 5 minutes.

 

Ok so here goes the fit of a console vault in a 2016 TRD sport double cab.

First thing to do is remove two bolts (10mm) from inside center console. Then tilt the vault forward and fit it in. It takes some pressure to get it in. I really had to force or in order to make it go all the way down. It it's not flush the console lid won't properly latch.

Next, replace the bolts provided (longer than the ones that were removed). Make sure your seats are all the way back so they don't hit the center console and cause the holes to not align (I learned the hard way).

That's it. Took about 20 min total.

 

+1 nice add