1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Any reason why this Add a Circuit is limited to 10amps? Combination of Error Codes What method do y'all recommend using to add diff fluid? Turn signal connector ripped off, is it a Molex connector? 6 speed shenanigans. RA60F swap to RC62F Dometic Hardwire Kit Install - In Bed Side Pocket Above Wheel Well - 2nd Gen AC

Official Crawlbox BS thread!

Discussion in 'Technical Chat' started by HomerTaco, Mar 16, 2016.

Page 4 of 176
  1. Mar 17, 2016 at 7:24 PM
    #61
    SGTCap

    #61
    SGTCap Well-Known Member

    Joined:
    Oct 30, 2013
    Member:
    #115529
    Messages:
    3,834
    Gender:
    Male
    First Name:
    Cap
    Summerville, SC
    Vehicle:
    4x4 6-spd,
    37s, 4x4 6-spd, OME 886s, Allpro Expos, SOS sliders and front/rear bumpers,Rack,Skids, 4.56s, Lockers,Recon Winch, TJM RTT, Lots of tools, boxes and gear. Shaggy mutt behind the seat
    SGTCap, Mar 17, 2016
    #61
  2. Mar 17, 2016 at 7:25 PM
    #62
    malburg114

    #62
    malburg114 Well-Known Member

    Joined:
    Dec 26, 2012
    Member:
    #93766
    Messages:
    3,792
    Gender:
    Male
    Las Vegas, NV
    Vehicle:
    2001 Toyota Tacoma TRD
    Its defintely not going anywhere:D Just need to make the templates to cut the skids then it should be bullet proof
     
    malburg114, Mar 17, 2016
    #62
  3. Mar 17, 2016 at 7:26 PM
    #63
    rctoy

    #63
    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,981
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    Priorities man!!!! Bad ass ain't cheap and cheap int bad ass!!
     
    rctoy, Mar 17, 2016
    #63
    malburg114 likes this.
  4. Mar 17, 2016 at 7:39 PM
    #64
    SGTCap

    #64
    SGTCap Well-Known Member

    Joined:
    Oct 30, 2013
    Member:
    #115529
    Messages:
    3,834
    Gender:
    Male
    First Name:
    Cap
    Summerville, SC
    Vehicle:
    4x4 6-spd,
    37s, 4x4 6-spd, OME 886s, Allpro Expos, SOS sliders and front/rear bumpers,Rack,Skids, 4.56s, Lockers,Recon Winch, TJM RTT, Lots of tools, boxes and gear. Shaggy mutt behind the seat
    SGTCap, Mar 17, 2016
    #64
  5. Mar 17, 2016 at 7:46 PM
    #65
    HomerTaco

    #65
    HomerTaco [OP] also HomerTaco Vendor

    Joined:
    Mar 28, 2010
    Member:
    #34129
    Messages:
    45,875
    Gender:
    Male
    First Name:
    HomerTaco
    HomerTaco
    Vehicle:
    HomerTaco
    HomerTaco ...................................................................................................................................................... Core-Hurst short throw shifter & T-handle / Carbon Fiber Interior / custom console light / De-badged / leather interior / Heated Front seats / Red Line Hood Struts / Painted speaker grills /one-off TRD Satoshi Grill with 12-15 front-end swap/ Pioneer AVIC-X920BT HU / Scangauge II / Black LED Tails / Dash Mount for iPad mini / Safari Snorkel / Auto-pilot mode / Leer 100XQ Cap / 4x Innovations sliders / Rear Diff Breather Mod / front windows tinted to 35% / Brute Force Fab Hybrid Front Bumper / BAMF Rear Diff Skid / Budbuilt Skids / CBI Trail Master 2.0 rear hybrid bumper / Fox rr coils/ TC UCA's/ TC spindle gussets/ TC Cam Tab gussets / Dakar leafs / Defined Engineering shackles / All pro U bolt flip / Timbren Rear Bumpstops / BAMF LCA skids / Exhaust re-route / Fog Light anytime Mod / LowRange Off Road extended rear brake lines / ATO Shackle Flip / sectioned Bushwhacker flares / re-geared to 4.56 / ARB Front & Rear Locking Diff / ARB CKMA12 compressor / PrInSu full rack system / 1" body lift / Inchworm 4.7 crawlbox / twin stick FJ t-case / Davez off-road triple-stick kit/
    Not used to the 1st. gen setups but thanks for posting the pics! :thumbsup:
     
    HomerTaco, Mar 17, 2016
    #65
  6. Mar 17, 2016 at 7:54 PM
    #66
    malburg114

    #66
    malburg114 Well-Known Member

    Joined:
    Dec 26, 2012
    Member:
    #93766
    Messages:
    3,792
    Gender:
    Male
    Las Vegas, NV
    Vehicle:
    2001 Toyota Tacoma TRD
    Never any love for the 1st gens :( just kidding! Thanks!
     
    malburg114, Mar 17, 2016
    #66
    jubei likes this.
  7. Mar 17, 2016 at 7:58 PM
    #67
    rctoy

    #67
    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,981
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    Personally I think first gens re the last real deal. Second gen = plastic new age tech.
     
    rctoy, Mar 17, 2016
    #67
    Prayn4surf and jubei like this.
  8. Mar 17, 2016 at 7:59 PM
    #68
    malburg114

    #68
    malburg114 Well-Known Member

    Joined:
    Dec 26, 2012
    Member:
    #93766
    Messages:
    3,792
    Gender:
    Male
    Las Vegas, NV
    Vehicle:
    2001 Toyota Tacoma TRD
    I agree. But done right, they all look good in my opinion. I do like how the 2nd gens are slightly larger though.
     
    malburg114, Mar 17, 2016
    #68
  9. Mar 17, 2016 at 8:03 PM
    #69
    HomerTaco

    #69
    HomerTaco [OP] also HomerTaco Vendor

    Joined:
    Mar 28, 2010
    Member:
    #34129
    Messages:
    45,875
    Gender:
    Male
    First Name:
    HomerTaco
    HomerTaco
    Vehicle:
    HomerTaco
    HomerTaco ...................................................................................................................................................... Core-Hurst short throw shifter & T-handle / Carbon Fiber Interior / custom console light / De-badged / leather interior / Heated Front seats / Red Line Hood Struts / Painted speaker grills /one-off TRD Satoshi Grill with 12-15 front-end swap/ Pioneer AVIC-X920BT HU / Scangauge II / Black LED Tails / Dash Mount for iPad mini / Safari Snorkel / Auto-pilot mode / Leer 100XQ Cap / 4x Innovations sliders / Rear Diff Breather Mod / front windows tinted to 35% / Brute Force Fab Hybrid Front Bumper / BAMF Rear Diff Skid / Budbuilt Skids / CBI Trail Master 2.0 rear hybrid bumper / Fox rr coils/ TC UCA's/ TC spindle gussets/ TC Cam Tab gussets / Dakar leafs / Defined Engineering shackles / All pro U bolt flip / Timbren Rear Bumpstops / BAMF LCA skids / Exhaust re-route / Fog Light anytime Mod / LowRange Off Road extended rear brake lines / ATO Shackle Flip / sectioned Bushwhacker flares / re-geared to 4.56 / ARB Front & Rear Locking Diff / ARB CKMA12 compressor / PrInSu full rack system / 1" body lift / Inchworm 4.7 crawlbox / twin stick FJ t-case / Davez off-road triple-stick kit/
    I agree as well. If not for the frame rust buyback I'd still have my 99' :(
     
    HomerTaco, Mar 17, 2016
    #69
  10. Mar 17, 2016 at 8:06 PM
    #70
    rctoy

    #70
    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,981
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    Yeah but have you seen a second gen with a bed bob?
    Case and point
     
    rctoy, Mar 17, 2016
    #70
    TacoBessy and eimkeith like this.
  11. Mar 17, 2016 at 8:10 PM
    #71
    Balockay

    #71
    Balockay Well-Known Member

    Joined:
    Dec 19, 2014
    Member:
    #144595
    Messages:
    4,167
    Gender:
    Male
    First Name:
    Blake
    Cleburne, TX
    Vehicle:
    2017 4Runner TRD ORP
    Just look at the build thread
    I have seen a bobbed 2nd gen.

    I'm a first gen guy though so I agree that 2nd gens suck.
     
    Balockay, Mar 17, 2016
    #71
    ToyotaDriver likes this.
  12. Mar 17, 2016 at 8:11 PM
    #72
    rctoy

    #72
    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,981
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    Pics or its a lie
     
    rctoy, Mar 17, 2016
    #72
  13. Mar 17, 2016 at 8:13 PM
    #73
    Balockay

    #73
    Balockay Well-Known Member

    Joined:
    Dec 19, 2014
    Member:
    #144595
    Messages:
    4,167
    Gender:
    Male
    First Name:
    Blake
    Cleburne, TX
    Vehicle:
    2017 4Runner TRD ORP
    Just look at the build thread
    Let me see if I can dig one up. He's got a flatbed now. Think I have some pics when it was still bobbed though.
     
    Balockay, Mar 17, 2016
    #73
  14. Mar 17, 2016 at 8:19 PM
    #74
    rctoy

    #74
    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,981
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    Flat bed cuz his plastic bed chop fell the fuck apart.
     
    rctoy, Mar 17, 2016
    #74
    ShiftyShank and Adude like this.
  15. Mar 17, 2016 at 8:21 PM
    #75
    HomerTaco

    #75
    HomerTaco [OP] also HomerTaco Vendor

    Joined:
    Mar 28, 2010
    Member:
    #34129
    Messages:
    45,875
    Gender:
    Male
    First Name:
    HomerTaco
    HomerTaco
    Vehicle:
    HomerTaco
    HomerTaco ...................................................................................................................................................... Core-Hurst short throw shifter & T-handle / Carbon Fiber Interior / custom console light / De-badged / leather interior / Heated Front seats / Red Line Hood Struts / Painted speaker grills /one-off TRD Satoshi Grill with 12-15 front-end swap/ Pioneer AVIC-X920BT HU / Scangauge II / Black LED Tails / Dash Mount for iPad mini / Safari Snorkel / Auto-pilot mode / Leer 100XQ Cap / 4x Innovations sliders / Rear Diff Breather Mod / front windows tinted to 35% / Brute Force Fab Hybrid Front Bumper / BAMF Rear Diff Skid / Budbuilt Skids / CBI Trail Master 2.0 rear hybrid bumper / Fox rr coils/ TC UCA's/ TC spindle gussets/ TC Cam Tab gussets / Dakar leafs / Defined Engineering shackles / All pro U bolt flip / Timbren Rear Bumpstops / BAMF LCA skids / Exhaust re-route / Fog Light anytime Mod / LowRange Off Road extended rear brake lines / ATO Shackle Flip / sectioned Bushwhacker flares / re-geared to 4.56 / ARB Front & Rear Locking Diff / ARB CKMA12 compressor / PrInSu full rack system / 1" body lift / Inchworm 4.7 crawlbox / twin stick FJ t-case / Davez off-road triple-stick kit/
    The dude in Canada with 37's has a DCLB that's bobbed...
     
    HomerTaco, Mar 17, 2016
    #75
    Blacktacoma23 likes this.
  16. Mar 17, 2016 at 8:24 PM
    #76
    rctoy

    #76
    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,981
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    How did that work out? Rivits? Duct tape?
     
    rctoy, Mar 17, 2016
    #76
  17. Mar 17, 2016 at 8:24 PM
    #77
    Balockay

    #77
    Balockay Well-Known Member

    Joined:
    Dec 19, 2014
    Member:
    #144595
    Messages:
    4,167
    Gender:
    Male
    First Name:
    Blake
    Cleburne, TX
    Vehicle:
    2017 4Runner TRD ORP
    Just look at the build thread
    Nah it never fell apart. I think he just went flatbed for the hell of it after he SAS'd it. It's been a few years and I haven't seen him much since then so I don't really remember what his reasoning was.
     
    Balockay, Mar 17, 2016
    #77
  18. Mar 17, 2016 at 8:25 PM
    #78
    rctoy

    #78
    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,981
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    I'm just hatting on the evolution of composites
     
    rctoy, Mar 17, 2016
    #78
  19. Mar 17, 2016 at 8:35 PM
    #79
    SMKYTXN

    #79
    SMKYTXN If it can't be overdone it's not worth doing Vendor

    Joined:
    Mar 11, 2011
    Member:
    #52810
    Messages:
    14,040
    Gender:
    Male
    First Name:
    Nathan
    Houston
    Vehicle:
    11, 4dr, TRD Sport, 6sp
    DCFB
    Bam!

    [​IMG]
     
    SMKYTXN, Mar 17, 2016
    #79
  20. Mar 17, 2016 at 8:40 PM
    #80
    rctoy

    #80
    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,981
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    Still hatting on composites
     
    rctoy, Mar 17, 2016
    #80
Page 4 of 176
To Top