What have you done to your Tacoma today? 1st Gen Edition

Clean truck Brian...what grill is that?

 

Weld on or bolt on?

 

I can't find the fill or drain plug on the front... I'm a freakin idiot I swear.

 

You did remove the skid plate correct? You do have 4wd right, right?

Also it says to fill the front till it starts to spill out, you actually want it a few mm below that. Fill it all the way and go drive a long distance at highway speeds and you'll puke gear oil out the breather into the engine bay. Trust me I found this out personally.

 

Yes skids off, 4 wheel drive. I'm gonna go look again when it gets warmer...

 

Oh yep got em, mine are just full of dirt.

 

The AllPros for our truck are either weld on or bolt on.....as in they send you 32 self tap bolts if you chose to drill up your frame into a piece of Swiss cheese....so most weld them on, such as myself

 

Well... I did a potentially be oops. I stripped the drain bolt. If I can't get it out, does anyone know if this will work as a replacement? http://www.4wheelparts.com/Drivetra...QJ02HxxweLXtM-RoC-7Lw_wcB#questions_Container

I think the link should work.

 

LOVE THE GRILL

 

Probably. Have fun getting it out. I had to weld a big ass nut to mine and use a high torque air impact to get mine off

 

We'll give it a good go

 

I'm one of the few lucky folks that popped a hex socket on and it just unscrewed like any other bolt.

 

How much were the rock sliders? I am thinking about getting the 4x innovation ones but I like the look of those you have

 

Look at all pros website

 

Before trying to weld it try the next size up hex driver or torque bit and hammer it in there, also heat or penetrating oil. If that doesn't work then weld a bolt or nut to it.

 

Someday I'll make make a bolt that's easier to take off.

 

Dang it! I may just stick to 4x innovations. Allpros are a little to expensive for me. Like the filler plates though

 

Went off roading with a couple buddies today

 

2016-03-19_12-18-45 by Harrison M, on Flickr

2016-03-19_12-19-01 by Harrison M, on Flickr