Raleigh North Carolina and surrounding areas

Install air tank, then it will use the tank. and compressor will come on will tank gets down to certain PSI

 

Yea when you have a locker, you can have 2 or 3 switches (one for each locker front and rear). If you wire it the way that the instructions say then the locker switch only has power when the air compressor switch is turned on. Whether you have a tank or not you should probably leave the air compressor switch on (especially if you wired it by the instructions) that way as Neight said the compressor will kick on when the tank gets low. With that said my switches are wired independently, and my 1.5 gallon tank has never ran out of air from just using the locker. I have sat there and turned it on and off about 30 times to see how much it would take and still haven't found the number. Your air line should hold enough pressure with the compressor turned off to keep the locker engaged but no sense in loosing pressure and the locker disengaging when you need it. Even without a tank the compressor shouldn't run except for short bursts each time you engage the locker.

 

@Blkvoodoo which union tee are you using? My passenger side inflation valve is leaking so I'm just going to go to a single inlet with a tee.

 

Ok thanks guys.....that's what I was thinking.....just wanted clarification

 

Lol, well, it was one I picked up at hydraulic shop when I rolled thru there one day

Legris 3104 56 00DOT Nylon Push-To-Connect Fitting, Complies with DOT, Union Tee, 1/4" Tube OD

http://www.amazon.com/gp/aw/d/B009P...40_QL65&keywords=1+4+push+to+connect+fittings
That will work, and as cheap as anything you'll get locally

 

I bought one similar to this at Lowes with the 1/4" inlets but it's way too big, I'm thinking the sizing is different for some reason

 

If it's what I'm thinking Love Wes stuff will be sized by NPT STANDARDS(National Pipe Thread)
which is sized by Internal diameter (I.D.) what you need is sized by O.D. Or outside diameter

Any place that make hydraulic hose assemblies should have it
They will ask if it is for air brakes ( DOT SPEC) and charge triple for it

 

Gotcha! I'll probably just order one off good ol' Amazon, I really wish they would give reward points for making so many purchases on there.

 

The reward is getting your crap in 2 days and not having to change out of your Jammie's (@Sandman614) to actually go anywhere...

 

Just logged into Amazon and see that I have placed 25 orders in the last 6 months....is that high or low? lol

 

Probably about normal. I sit at home all day and have 60 in the last 6 months, granted there are more from other sites

 

I got 19,,,,

 

I have a problem lol. Granted some of mine are for Jon

 

Fixing my cb grounding problem.

 

Ef that gorilla. Channel locks + PB blaster.

 

Blaster ? For an oil filter ?

 

rust man rust

 

Yea, he isn't using a Toyota filter.

 

what he said

 

At least oil the feck'n gasket on the new filter