TW's active 4runner builders BS thread

Need new coils

 

why? that looks great

 

i remember that wire.
Kill it.

 

Dibs on the front bumper

 

Me? I'm sagging bad

 

you look level. how often do you keep the tent on top?

 

for his own protection keep the nut on a few turns while hammering. It keeps the spindle from flopping open and smacking your knee and possibly pulling sensors.

 

Will do thanks guys

 

On what? Are you trying to separate the upper ball joint from the spindle or just the spindle from the UCA?

The upper ball joint is held on by a C clip and needs to be removed in order to remove the ball joint from the spindle. Otherwise that ball joint isn't going anywhere.

 

I'm just wanting to separate the UCA from the spindle.

 

Then you are good to go.

 

Fucking cotter pin is stuck. Soaking it with liquid wrench

 

I did it

 

So happy you'll know how to do all this when I nag you to help me

 

@dtaco06 damn you got all the info on me wtf! Danny with the satellites spooking me out watching all my moves on cctv.

@ramonortiz55 im alive buddy! I just have way less time to be on TW when I'm driving around with no internetz. Gots to use the wifis son!

 

i heard you lost a testicle out there.

 

Not that often but I'm unloaded in that pic and still smack my bumps on every bump

 

Extended bumps or stock. I don't even hit mine at 2"

 

After working on and off on the suspension after work I've semi completed one side. I've ran into a problem with removing the ball joint. I removed the c-clip and then ran out of light, now what? After I removed the upper ball joint boot, I was very impressed with how clean the OEM grease was.

 

i didnt know you were over here, apparently I'm late to every party