TW's active 4runner builders BS thread

Haha I just noticed that. It was her dads towing rig, so wonder if it that's why the tires are small.

 

This way?



Or this way?

 

This one.

 

x2

 

Also, I'm trying to switch them around. I see no snap ring to remove inside either side of the uniball. How can I do that?

 

Are you trying to swap them so that the offset is on the opposite side? If so, all you have to do is remove the misalignment spacers and swap them.

 

You also should be able to spin the entire lower part of the shock with a screw driver. Stick a big shaft in the lower bolt hole and try to twist it around.

 

upper arm always sits on top of the spindle.

 

use channel locks and pull out the misalignment spacer. by hand its almost impossible

 

His look rusty too, that's why I suggested the pipe in the lower shock mount and spinning the entire shock 180 degrees.

 

Yeah I'm trying to get a hold of that bitch but it won't budge

 

I need a fucking vice

 

yeah the rust might make it tight. Screwdriver in the post is probably easier.

 

You can bolt the shock in place on the upper mount (the 3 bolts). And then turn it while on the truck.

 

I fuckin love you

 

BTW you ever hear any updates about the shirts/hoodies? Not in a rush, just wondering.

 

He said they should be shipped this week

 

i got mine friday

 

I HATE you lol