What Have You Done To Your 3rd Gen Today?

What color dip did you get? They've got a blaze blue, but can't tell if it looks "right" or not.

 

Just curious bro, what models are considered "PreRunner" ?

 

It has a nice metal flake in it that is subtle but shows nice in the sun. I followed the directions on the can. First coat from about a foot away very light. Then three more light coats. Then one medium coat. It took me a little learning curve. I did the small piece first and it didn't look right. Blotchy and uneven. Peeled it off and tried again. I learned don't get to close or it puddles. Distance can be your friend. Keep it as level as possible. I used the can top under the short end on the larger section to keep it level. You don't really need to etch it. Just make sure it's clean. A very very fine steel wool and an alcohol prep pad. I also blew it off with some canned air. 10 minutes between coats. Set a timer and don't rush it.

 

Any 2 wheel drive Tacoma with the stock lift kit. All 2016s now come lifted, but generally the PreRunner was the SR5 2wd even though they make the TRD Sport and Offroad in a 2wd as well.

 

No lift, no rub.

 

Your not the only one. No lift, fenders cut, SAS, 4:1 atlas, LCG build would be sick on these trucks. But not till mines paid for.

 

The peer pressure was real so I broke down n did the standard decal mod. Also have weather beaters n avs vent visors on the way.

 

Just pulled the trigger on the TRD 17" wheels. $779.95 shipped. My pay pal balance was $0. So birthday present to myself. Even though my birthday isn't until July. The sweetheart is paying for the mount and balance and swap. So what the hell. Seriously this is the last mod. No really I am serious this time!

 

Good to know, thanks for the info.
I was considering the low pro ones but was under the impression they mounted on the outside.

 

U know we need pics after install.

 

e too until Andy confirmed. Everything I've seen, including videos, made them appear to be external mount. Just bad marketing.

 

what does SAS stand for?

 

Solid Axle Suspension/Swap

 

ahhh. ok, thanks

 

What tint % did you have on the front windows? Looks like a great match.

 

Yes, it would have been! Now, about 24" of snow in total?!?

 

Thank you for your service, Steve! I try and give credit to whom it is due when I see it. My brother served five tours Iraq/Afghanistan. I thank you!

 

Do you happen to have the product number for the ones you ordered for your truck? I'm wanting to get the ones you have bc the profile looks pretty low and not too much "bow" outward away from the window.

Thanks!

 

Do you have the part number for the low-profile-in-channel ones? Looking for them on Amazon and wanting to make sure I get the correct ones. I want the lowest profile possible but definitely want in-channel

Thanks