What Have You Done To Your 3rd Gen Today?

Running the 265/75/16 D rated on mine and have been very happy so far.

 

Understood!

Anyone add a fridge/freezer to their '16 Tacoma yet? I'm looking seriously at the ARB 50 quart.

 

Mine started that as well. It just means that it is time for maintenance.

 

I used felt, I didn't take off the A-pillar. I used a sticker squeegee and just kind of stuffed it in there.

 

Unconventional placement of my TW decal. Decided on the tonaeu cover. Now when the big boys in their lifted rigs look down on me they get some TW attitude.

 

It will stay on longer the closer you get to the 5 grand mileage. It is not just miles it takes into account. Driving, idling time, temps. Etc..

 

Did you just make those?

 

265/75/16 nitto 10ply no lift toytec boss lift still in route FedEx is slow for the holidays

 

Where did you get the spidertrax from and are they 1.25?

 

My husband installed my new Extang Tri-fold 2.0. So far I am very happy with it. Solid, easy to use and the weather stripping seems great. It came with two small foam pieces to put in the bed gaps behind the cab. I have not been in the rain or have had to wash my truck since he installed it, so can't tell you how much or if it leaks. I can tell you it's on there as perfect as it gets, my husband is a tweaker

I wanted a top mount because I have a bed divider that utilizes the rail system. I have also heard nothing but good things about Extang's customer service should there be an issue.

 

Yes. I went to "Lowes" and bought some indoor-outdoor carpet off the roll. I measured and cut each piece to size. Then, I used "Velcro" to attach it to the seat backs. I used a cigarette lighter to singe the loose threads on the ends.hth

 

That's more than likely not going to do anything. Each time I got the message, weather was fine and truck was clean or not that dirty.

Check that BSM thread, there was something about the wiring on the right side of the truck that could be causing. Also have you left it on long enough to see if the message would go away and the BSM operates correctly.

That was actually my post, he erased the BB codes for the quotation.

Dealership found my transmission to be almost a quart low so they filled it to the proper level. It wasn't an easy road trying to get the dealership to check the fluid level either.

 

Cleaned my truck and installed the TRD center caps on my wheels. I like both with or without, but probably without the center caps more. I'm gonna leave them on for the time being though.

 

After they verified that it was a quart low, did you get the seven-year hundred thousand mile extended warranty from Toyota like others have set on here ?

 

Haven't read anything about anybody getting an extended warranty. I did talk to Toyota Corporate about it, but haven't heard back from them after my last convo. The TC rep did nothing to help me and she's hard to get a hold of. When I brought up getting an extended warranty, she said that's something we can talk about so I'm hoping to get it.

 

Added backseat power this morning:



and the FedEx guy brought me my MaxTrax:

 

yes, it was 3 pieces, the outer ring and toyota emblem are separate from the mesh i dipped.

 

It is the windshield my Subaru was doing the same thing the I was going back and forth with the dealership finally they resealed the windshield with glue and the noise went away ask them to do it you'll see. Good luck

 

Did you 3d print that outlet?

 

Can you show us that build for the power outlets? That's what's missing in these tacos.