3rd gen leveling kit install

Does anyone know what is required to add a 3 inch leveling kit on the 3rd gen tacoma 4x4? I have the kit that supplies 3 inch front spacers, 2 inch rear blocks, and differential drop. Am i missing anything else from the kit that i should install for the lift?

 

Sounds like that's all that you need my braddah be prepared for a lot comments like don't do the spacer lift and what not. It's your build do what you want bro post some pics of the finish product.

 

Ive seen a video of the installation on. 2wd, not sure if skid plate spacers are necessary, mine didnt come with them. But ill post some oic after the installation

 

Heres my tacoma with the 3 inch installed, i just need bigger tires now

 

Nice truck how's the ride?

 

It vibrates a little, i need to schedule alignment

 

If you have straight block in the rear that will give you vibration, alignment won't fix that, however degree shims will. Get 3 degree shims from headstrong

 

Got my alignment done and also added 2 inch wheel spacers. Ill stick with the stock for now untik i save up enough for new tires lovin the stance on it

 

How did the alignment turnout?

 

It made a big difference, i feel alot safer turning corners thanks to the wheel spacers for wider stance, although i still feel a slight vibration when coming to a stop, i may need new rear shocks as well because my stock is short and it is not doung its job when i hit bumps

 

Read post # 7

 

Do i insert degree shims between the block and leaf springs?

 

Correct

 

Bro are you located on Maui I think I saw you yesterday by Safeway

 

Yeah Kahului side

 

Oh cherry nice truck

 

Thanks

 

Where did you get your leveling kit from?

 

Hey man ever figure out the vibration issue you were having I’m having the same issue with the same kit