1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

New Arizona Member

Discussion in 'New Members' started by Vitalzone, Mar 31, 2016.

  1. Mar 31, 2016 at 8:46 PM
    #1
    Vitalzone

    Vitalzone [OP] Well-Known Member

    Joined:
    Mar 26, 2016
    Member:
    #182410
    Messages:
    252
    Gender:
    Male
    Arizona
    Vehicle:
    2016 TRD OR 4x4 DCSB 6 spd manual
    -ADS coil overs with RR, and compression adjusters -ADS triple bypass rear shocks -Mcm UCAs -Deaver U402 stage 1 leaf packs -ADS bumps in the rear with Icon U bolt flip striker plates -Relentless Offroad U bolts -Wheeler superbumps in front -SCS 17" Ray 10s -285/75/17 BFG KM2s -Nitro 5.29 gears -Pelfteybilt armor front to back with HC rear bumper. T- case skid cut to fit Spec U exhaust. -RCI diff skid -Avid bed bars with basket holding spare. Poison Spyder 3-way strap. Hi-lift jack,and shovel mounted to basket. - SDHQ ditch light brackets with BD Squadron Pro spots. -BD Squadron Pro wide cornering in F. bumper. -BD S8 30" bar in F. bumper -Smittybilt 10k X20 winch -Factor 55 fairlead, and prolink -Switch pro 9100, with custom machined aluminum switch bezel. -BAMF grille insert -URD short throw shifter -URD Spec U exhaust cut over axle. Exhaust looks like it was fabricated by a blind child. -Suntek carbon XP 18% tint all around -ARB single compressor, mounted on Slee bracket. Lines to front, and rear bumper. -Rear diff breather mod,ran to bed cubby. -Ovtune 1.05 FOB 91 -Sprint-booster -Clutch accumalator delete mod -Hella Sharptone horns -Crown +4” extended brake lines, with modified factory brackets to fit lines. -Hypertech speedo calibrator -Custom pinstripes, and trail rash done by the beautiful AZ desert.
    Hello Tacomaworld! My name is Shaun hailing from Apache Junction AZ. I have been lurking around the site for the past several months researching 3rd gen Tacoma's, and checking out some bad ass builds. Today is the day I finally feel worthy enough to introduce myself...why? Because I just ordered my 2016 Taco DCSB Trd Off Road 6-spd manual cloaked in Magnetic Gray Metallic paint. Proud to be a part of the Tacomaworld community, and thanks to all whom have posted the valuable information that made my decision to buy a Toyota an easy one.
     
    T-rev and phx13 like this.
  2. Mar 31, 2016 at 8:50 PM
    #2
    neslerrah

    neslerrah Taco lovin'

    Joined:
    Feb 18, 2008
    Member:
    #4803
    Messages:
    6,753
    Gender:
    Male
    First Name:
    Harrelsen
    Tucson
    Vehicle:
    5 lug BEAST!
    Secondary air filter removed, elbow mod, BFG T/A KO (31x10.5R15), 15" American Racing Mojaves, BHLM, Dome Light MOD (Blue), Pioneer headunit, Sockmonkey 'TACOMA' Decals, Readylift 5-lug SST, Rear Shocks - Bilstein TRD, Dynomax Super Turbo #17748, DDM Slim Ballast HID Kit H4 Hi/Lo -35W 6000K in headlights, Apexcone Raptor HID Kit H3 - 35W 6000K in Hella 500s, aFe CAI #51-10762, WeatherTech Floorliner, 200W Smart AC Inverter
    Hello and welcome. :wave:
     
  3. Mar 31, 2016 at 8:51 PM
    #3
    phx13

    phx13 Well-Known Member

    Joined:
    Oct 18, 2015
    Member:
    #167036
    Messages:
    4,546
    Gender:
    Male
    First Name:
    Rob
    Vehicle:
    2015 DCSB TRD O/R
    MT stuff, RTT stuff, the usual.
    Greetings, from San Tan Valley!:cheers:
     
  4. Mar 31, 2016 at 9:03 PM
    #4
    stumbles

    stumbles 1 eye

    Joined:
    Aug 18, 2014
    Member:
    #136442
    Messages:
    4,391
    Gender:
    Male
    First Name:
    bryan
    mesa
    Vehicle:
    2002 White Double Cab
    Welcome. From Mesa
     
  5. Mar 31, 2016 at 9:06 PM
    #5
    DustStorm4x4

    DustStorm4x4 BBC 2020

    Joined:
    Jul 2, 2015
    Member:
    #158634
    Messages:
    8,933
    Gender:
    Male
    U S A
    Vehicle:
    04 Jeep LJ
    Welcome to TW
     
  6. Mar 31, 2016 at 9:58 PM
    #6
    Vitalzone

    Vitalzone [OP] Well-Known Member

    Joined:
    Mar 26, 2016
    Member:
    #182410
    Messages:
    252
    Gender:
    Male
    Arizona
    Vehicle:
    2016 TRD OR 4x4 DCSB 6 spd manual
    -ADS coil overs with RR, and compression adjusters -ADS triple bypass rear shocks -Mcm UCAs -Deaver U402 stage 1 leaf packs -ADS bumps in the rear with Icon U bolt flip striker plates -Relentless Offroad U bolts -Wheeler superbumps in front -SCS 17" Ray 10s -285/75/17 BFG KM2s -Nitro 5.29 gears -Pelfteybilt armor front to back with HC rear bumper. T- case skid cut to fit Spec U exhaust. -RCI diff skid -Avid bed bars with basket holding spare. Poison Spyder 3-way strap. Hi-lift jack,and shovel mounted to basket. - SDHQ ditch light brackets with BD Squadron Pro spots. -BD Squadron Pro wide cornering in F. bumper. -BD S8 30" bar in F. bumper -Smittybilt 10k X20 winch -Factor 55 fairlead, and prolink -Switch pro 9100, with custom machined aluminum switch bezel. -BAMF grille insert -URD short throw shifter -URD Spec U exhaust cut over axle. Exhaust looks like it was fabricated by a blind child. -Suntek carbon XP 18% tint all around -ARB single compressor, mounted on Slee bracket. Lines to front, and rear bumper. -Rear diff breather mod,ran to bed cubby. -Ovtune 1.05 FOB 91 -Sprint-booster -Clutch accumalator delete mod -Hella Sharptone horns -Crown +4” extended brake lines, with modified factory brackets to fit lines. -Hypertech speedo calibrator -Custom pinstripes, and trail rash done by the beautiful AZ desert.
    Will do. I will be impatiently awaiting delivery for 6-8 weeks.
     
    DesertTaco4x4 likes this.
  7. Mar 31, 2016 at 9:59 PM
    #7
    Vitalzone

    Vitalzone [OP] Well-Known Member

    Joined:
    Mar 26, 2016
    Member:
    #182410
    Messages:
    252
    Gender:
    Male
    Arizona
    Vehicle:
    2016 TRD OR 4x4 DCSB 6 spd manual
    -ADS coil overs with RR, and compression adjusters -ADS triple bypass rear shocks -Mcm UCAs -Deaver U402 stage 1 leaf packs -ADS bumps in the rear with Icon U bolt flip striker plates -Relentless Offroad U bolts -Wheeler superbumps in front -SCS 17" Ray 10s -285/75/17 BFG KM2s -Nitro 5.29 gears -Pelfteybilt armor front to back with HC rear bumper. T- case skid cut to fit Spec U exhaust. -RCI diff skid -Avid bed bars with basket holding spare. Poison Spyder 3-way strap. Hi-lift jack,and shovel mounted to basket. - SDHQ ditch light brackets with BD Squadron Pro spots. -BD Squadron Pro wide cornering in F. bumper. -BD S8 30" bar in F. bumper -Smittybilt 10k X20 winch -Factor 55 fairlead, and prolink -Switch pro 9100, with custom machined aluminum switch bezel. -BAMF grille insert -URD short throw shifter -URD Spec U exhaust cut over axle. Exhaust looks like it was fabricated by a blind child. -Suntek carbon XP 18% tint all around -ARB single compressor, mounted on Slee bracket. Lines to front, and rear bumper. -Rear diff breather mod,ran to bed cubby. -Ovtune 1.05 FOB 91 -Sprint-booster -Clutch accumalator delete mod -Hella Sharptone horns -Crown +4” extended brake lines, with modified factory brackets to fit lines. -Hypertech speedo calibrator -Custom pinstripes, and trail rash done by the beautiful AZ desert.
    Thank you
     
  8. Mar 31, 2016 at 10:00 PM
    #8
    Vitalzone

    Vitalzone [OP] Well-Known Member

    Joined:
    Mar 26, 2016
    Member:
    #182410
    Messages:
    252
    Gender:
    Male
    Arizona
    Vehicle:
    2016 TRD OR 4x4 DCSB 6 spd manual
    -ADS coil overs with RR, and compression adjusters -ADS triple bypass rear shocks -Mcm UCAs -Deaver U402 stage 1 leaf packs -ADS bumps in the rear with Icon U bolt flip striker plates -Relentless Offroad U bolts -Wheeler superbumps in front -SCS 17" Ray 10s -285/75/17 BFG KM2s -Nitro 5.29 gears -Pelfteybilt armor front to back with HC rear bumper. T- case skid cut to fit Spec U exhaust. -RCI diff skid -Avid bed bars with basket holding spare. Poison Spyder 3-way strap. Hi-lift jack,and shovel mounted to basket. - SDHQ ditch light brackets with BD Squadron Pro spots. -BD Squadron Pro wide cornering in F. bumper. -BD S8 30" bar in F. bumper -Smittybilt 10k X20 winch -Factor 55 fairlead, and prolink -Switch pro 9100, with custom machined aluminum switch bezel. -BAMF grille insert -URD short throw shifter -URD Spec U exhaust cut over axle. Exhaust looks like it was fabricated by a blind child. -Suntek carbon XP 18% tint all around -ARB single compressor, mounted on Slee bracket. Lines to front, and rear bumper. -Rear diff breather mod,ran to bed cubby. -Ovtune 1.05 FOB 91 -Sprint-booster -Clutch accumalator delete mod -Hella Sharptone horns -Crown +4” extended brake lines, with modified factory brackets to fit lines. -Hypertech speedo calibrator -Custom pinstripes, and trail rash done by the beautiful AZ desert.
    Thanks man. Good to know plenty of locals floating around here.
     
  9. Mar 31, 2016 at 10:01 PM
    #9
    Vitalzone

    Vitalzone [OP] Well-Known Member

    Joined:
    Mar 26, 2016
    Member:
    #182410
    Messages:
    252
    Gender:
    Male
    Arizona
    Vehicle:
    2016 TRD OR 4x4 DCSB 6 spd manual
    -ADS coil overs with RR, and compression adjusters -ADS triple bypass rear shocks -Mcm UCAs -Deaver U402 stage 1 leaf packs -ADS bumps in the rear with Icon U bolt flip striker plates -Relentless Offroad U bolts -Wheeler superbumps in front -SCS 17" Ray 10s -285/75/17 BFG KM2s -Nitro 5.29 gears -Pelfteybilt armor front to back with HC rear bumper. T- case skid cut to fit Spec U exhaust. -RCI diff skid -Avid bed bars with basket holding spare. Poison Spyder 3-way strap. Hi-lift jack,and shovel mounted to basket. - SDHQ ditch light brackets with BD Squadron Pro spots. -BD Squadron Pro wide cornering in F. bumper. -BD S8 30" bar in F. bumper -Smittybilt 10k X20 winch -Factor 55 fairlead, and prolink -Switch pro 9100, with custom machined aluminum switch bezel. -BAMF grille insert -URD short throw shifter -URD Spec U exhaust cut over axle. Exhaust looks like it was fabricated by a blind child. -Suntek carbon XP 18% tint all around -ARB single compressor, mounted on Slee bracket. Lines to front, and rear bumper. -Rear diff breather mod,ran to bed cubby. -Ovtune 1.05 FOB 91 -Sprint-booster -Clutch accumalator delete mod -Hella Sharptone horns -Crown +4” extended brake lines, with modified factory brackets to fit lines. -Hypertech speedo calibrator -Custom pinstripes, and trail rash done by the beautiful AZ desert.
    Thank you
     
  10. Mar 31, 2016 at 10:02 PM
    #10
    Vitalzone

    Vitalzone [OP] Well-Known Member

    Joined:
    Mar 26, 2016
    Member:
    #182410
    Messages:
    252
    Gender:
    Male
    Arizona
    Vehicle:
    2016 TRD OR 4x4 DCSB 6 spd manual
    -ADS coil overs with RR, and compression adjusters -ADS triple bypass rear shocks -Mcm UCAs -Deaver U402 stage 1 leaf packs -ADS bumps in the rear with Icon U bolt flip striker plates -Relentless Offroad U bolts -Wheeler superbumps in front -SCS 17" Ray 10s -285/75/17 BFG KM2s -Nitro 5.29 gears -Pelfteybilt armor front to back with HC rear bumper. T- case skid cut to fit Spec U exhaust. -RCI diff skid -Avid bed bars with basket holding spare. Poison Spyder 3-way strap. Hi-lift jack,and shovel mounted to basket. - SDHQ ditch light brackets with BD Squadron Pro spots. -BD Squadron Pro wide cornering in F. bumper. -BD S8 30" bar in F. bumper -Smittybilt 10k X20 winch -Factor 55 fairlead, and prolink -Switch pro 9100, with custom machined aluminum switch bezel. -BAMF grille insert -URD short throw shifter -URD Spec U exhaust cut over axle. Exhaust looks like it was fabricated by a blind child. -Suntek carbon XP 18% tint all around -ARB single compressor, mounted on Slee bracket. Lines to front, and rear bumper. -Rear diff breather mod,ran to bed cubby. -Ovtune 1.05 FOB 91 -Sprint-booster -Clutch accumalator delete mod -Hella Sharptone horns -Crown +4” extended brake lines, with modified factory brackets to fit lines. -Hypertech speedo calibrator -Custom pinstripes, and trail rash done by the beautiful AZ desert.
    Thank you
     
  11. Mar 31, 2016 at 10:02 PM
    #11
    Enjoihavok

    Enjoihavok Never Forget Z.S.

    Joined:
    Mar 28, 2015
    Member:
    #151992
    Messages:
    7,618
    Gender:
    Male
    First Name:
    Erik
    Chandler, AZ
    Vehicle:
    2021 Tundra Pro
    Welcome from, Chandler
     
  12. Mar 31, 2016 at 10:10 PM
    #12
    Vitalzone

    Vitalzone [OP] Well-Known Member

    Joined:
    Mar 26, 2016
    Member:
    #182410
    Messages:
    252
    Gender:
    Male
    Arizona
    Vehicle:
    2016 TRD OR 4x4 DCSB 6 spd manual
    -ADS coil overs with RR, and compression adjusters -ADS triple bypass rear shocks -Mcm UCAs -Deaver U402 stage 1 leaf packs -ADS bumps in the rear with Icon U bolt flip striker plates -Relentless Offroad U bolts -Wheeler superbumps in front -SCS 17" Ray 10s -285/75/17 BFG KM2s -Nitro 5.29 gears -Pelfteybilt armor front to back with HC rear bumper. T- case skid cut to fit Spec U exhaust. -RCI diff skid -Avid bed bars with basket holding spare. Poison Spyder 3-way strap. Hi-lift jack,and shovel mounted to basket. - SDHQ ditch light brackets with BD Squadron Pro spots. -BD Squadron Pro wide cornering in F. bumper. -BD S8 30" bar in F. bumper -Smittybilt 10k X20 winch -Factor 55 fairlead, and prolink -Switch pro 9100, with custom machined aluminum switch bezel. -BAMF grille insert -URD short throw shifter -URD Spec U exhaust cut over axle. Exhaust looks like it was fabricated by a blind child. -Suntek carbon XP 18% tint all around -ARB single compressor, mounted on Slee bracket. Lines to front, and rear bumper. -Rear diff breather mod,ran to bed cubby. -Ovtune 1.05 FOB 91 -Sprint-booster -Clutch accumalator delete mod -Hella Sharptone horns -Crown +4” extended brake lines, with modified factory brackets to fit lines. -Hypertech speedo calibrator -Custom pinstripes, and trail rash done by the beautiful AZ desert.
    Thanks much appreciated
     
  13. Mar 31, 2016 at 10:10 PM
    #13
    StOrMyThEtAcO

    StOrMyThEtAcO @stormythetaco

    Joined:
    Mar 23, 2015
    Member:
    #151561
    Messages:
    7,411
    Gender:
    Male
    First Name:
    Cody
    CO
    Vehicle:
    18 TRD Sport mom bus
    All of them
    ODNAREM likes this.
  14. Apr 1, 2016 at 12:53 AM
    #14
    ODNAREM

    ODNAREM MEMBER Of The Church Of @ODNAREM

    Joined:
    Feb 28, 2015
    Member:
    #149762
    Messages:
    41,285
    Gender:
    Male
    First Name:
    Ron
    Huntington Beach,CA.
    Vehicle:
    2012 TRD Sport Prerunner
    TRD catback exhaust,FJ Cruiser trail team wheels,BFG All Terrain K02 tires,Grillcraft front grill,Pelfreybilt IFS/Mid skids,sliders,standard rear bumper,Total Chaos bed stiffeners.TRD Pro Bilstein front/rear suspension.
    Welcome to the club!:thumbsup:
     
  15. Apr 1, 2016 at 10:12 AM
    #15
    mattgecko

    mattgecko The LED Lighting Guy. MattGeckoLEDs.com

    Joined:
    Jul 5, 2011
    Member:
    #59337
    Messages:
    13,089
    Gender:
    Male
    First Name:
    Matt
    South San Jose, CA
    Vehicle:
    2011 DCSB O.R. 4wd TRD Super Charged
    Congrats on your new Tacoma and welcome!
     

Products Discussed in

To Top