Does this sound correct?

I have a 1" rake on 2016 DC. I bought bilsteins and want to set to 2.5 and ad 1" solid block on back. No off-road use at all. Thank you for any opinions

 

Don't use a block..get a aal.

 

Are you trying to level? My math says, with 1" of rake and +2.5"F/+1"R=1/2" high in front

Those Bilsteins are for '05-'15; '16s have a taller spring and higher spring rate.
The lift heights and valving are different.
https://www.tacomaworld.com/threads...2016-tacoma-presented-by-toytec-lifts.395798/

Thought I read Bilstein has '16 model-specific coming...
https://www.tacomaworld.com/threads...-by-toytec-lifts.395798/page-78#post-11973869

AAL in the rear; no block.

IMO, if you're not off-roading, don't lift it; at most level the front.
Unless you're trying to clear big tires; got to do, what you got to do.

If you have a 4x4 and want that much lift, I'd be prepared for needle bearing vibes.
I plan on 1" of lift after bumpers and armor. I'll probably do the ECGS bushing mod then; if I don't get the vibes before then.

 

Im starting to think just leveling is more all i need. So bilsteins at .85 nothing in back.do you do alignment at that increment.. Thanks

 

0" or .85"
The lift height is exaggerated when applied on '16s; .85" might be too much.

Yes; alignment after lifting.

 

Thank you for your help

 

I say lift it...yolo!!

 

I promised myself I would finally keep something stock once in my life and two days after buying I bought shocks. I just want level because it rides so beutiful.

 

Your 4wd sits too high......Said no one ever....

Raise it. 1" blocks don't hurt a thing. AAL is slightly better, but not enough to bark about with just 1"

 

We've all been there...
I just made a promise, not to make promises I can't keep.
Which model did you get?

 

2016 DC longbed sr5 black. I do nothing except drive on street. It has nice stance. Just going to make level. I appreciate everyone's help