Just installed Opt7 LEDs in projectors and fogs.

Anyone have any good ones that are 8k? I had 6k on my old car and brother had same car in 8k. I searched on Amazon and saw some but didn't know if anyone had any luck with a good set of 8k

 

To those that have had them for a couple months, what are your thoughts? Any issues, complaints, feedback?

 

Opt7 2 months and not one complaint or issue

 

Yet factory HID/LED that have properly designed projectors for that bulb type don't have any issues with oncoming traffic. In fact, many of those systems have even less glare for oncoming drivers because the beam cut off is so good. You will never achieve the same sticking an LED or HID bulb into a halogen projector. So don't claim it has anything to do with the brightness of the light, because it has everything to do with using the incorrect bulb in a housing that wasn't designed for it.

 

I've been using it for almost a month and don't have any complaints.

 

Roughly 2.5 weeks and no complaints here. Light is clean, bright and works great for me.

 

For those that have resulted in plugging in the Opt7 flux capacitor, it bumps the LED output to 1.21 jiggawatts. IMO, keep your taco under 88 mph.

 

You are one of those people clearly.

 

Any issues of blinding oncoming traffic? Do they high beam flash you?

 

Yea I guess so. BBL, time to go hug a tree and save a whale.

 

Nope, not one flash.

 

2 months + not one high beam flash here

 

I haven't had that happen once. There's a pretty good cut off that prevents you from blinding others.

 

Just received my OPT7's today and followed the instructions that were
provided made it easily installed in less than 20 minutes. I'm very impressed with the color, clarity, and brightness. I only ordered two boxes and installed them in the low and high beam slots. I'm definately going ordered another box for the fog lights.

 

. Hi! Not really but I am not sure if they were properly installed, I never check if each LED "bulb" was meant to be for left or right beam and or if the orientation of the led "bulb" had an up or down setting

 

Hi! Not really but I am not sure if they were properly installed, I never check if each LED "bulb" was meant to be for left or right beam and or if the orientation of the led "bulb" had an up or down setting.

My high beam seems a bit out of focus.. And I had minor condensation the first night but I live in freacking Cancun were humidity is at its best.

 

They work just fine and fit properly. I've been running them since Friday night and they're amazing. I am going with the in the fog lights instead.

OPT7 CREE H11 LED DRL 5000K Bright White Fog Light Bulbs - Pack of 2

http://www.amazon.com/dp/B00SZK26T0

 

Almost 2 months of driving with the OPT-7 and 0 complaints, 0 high-beam flash from other drivers, nothing. However today I noticed my passenger bulb went out. Looked kinda like it was flickering then nothing. Will check it tmrw to update. This is strange because this is the only side I used the polarity pigtail. Hmmm..... Oh, I emailed opt-7 and received a troubleshoot email response in less than 1 hour. Thumbs up

 

Ok, had some water damage in the plug between the polarity reverse cable and the bulb 'igniter' cable. Had it all squared away with OPT-7 to receive another cable. Luckily I had a spare I didn't use to replace it. Just heads up guys, the weatherproof seals are not 'weatherproof'

 

Maybe I am misinterpreting what you are saying but would something like liquid electrical tape work to make the seal weatherproof?