What Have You Done To Your 2nd Gen Tacoma Today?

You still in Fullerton? This is Erik from OC Moto (Cycle Gear Erik)!

 

I got my transmission fluid changed at the stealership today. I was curious what kind of BS repair recommendations they'd come up with and they didn't disappoint. $1700 worth.

 

Hey, what's up! No, I moved to Kansas 2 years ago.

 

How you liking Kansas? I've always thought it's pretty out there never been tho

 

I'm still adjusting...It's not SoCal... No roads with curves, desert, mountains or the ocean, no real Mexican, Chinese, ethnic food.
But, there's no traffic, houses are cheap, DMV is not packed, no smog check, school system is great, friendly people and it's 2A friendly state.

 

Those are sexy, want the same but with the filler plates. The better half thought our taxes would be better spent on a vacation, blah!!

 

And most after market vendor or shop for my taco is out there!

 

I removed and sold my Leer camper shell the other day, which was exciting. What is not so exciting is I noticed a small spot where it must have been rubbing on the body and there is a picky tip sized spot down to the metal right at the front driver side corner of the bed. I suppose I'll need to try to touch that up soon. It also looks like it warped the top bed protectors some, not to mention scratched the hell out of them.

 

Made some ditch mounts.

 

Replaced my stock grill!

 

Very nice, and clean. I've been meaning to build a platform for my air mattress. Perfect setup for when I spend nights on the beach striper fishing. Or I wanna lay down with a stripper.

 

LOL. It's okay man. Let it go. That anger will eat you up inside.

 

Man that is EXACTLY what I need to do. How'd you get the gauge cover off?

 

These are CBI bolt ons, and it was a pretty hard hit, so I'm not surprised. My truck would look much worse if I didn't have them - thanks @CBI Offroad Fab !

 

That happened to me too. So I took it out on a few trails and got it dirty again

 

I did the mod! its easy just get a switch and wire it to the green wire.

 

I used the Metra 99-8214 kit and my truck is a 2008 base model reg cab.

 

Awesome I didn't k mow that mod would work

 

i got a 3 prong switch and took power from a cig outlet to the switch power, grounded the switch and the acc. power on the switch was the green wire from the radio. it was simple once i figured it out.

 

I put two tailgate assist on mine t