Question about wheels

Ehh... Just not wide enough...

 

JKilPatrick,

Hi, new here, are those trucks you posted all on stock suspension? I'm looking to widen stance a little on stock suspension without having to mod anything for rubbing.

 

all those are 3" lifts(some spacers, some coilovers) with 33s

 

What about 18x10x-24 ? Would that still be wide but fit?

 

I ran 20x10 -24s on my 2015 with a 6" lift and 33s..Unless your gonna run a lower profile street tire that aggressive is prob gonna be a little tricky

 

I planned on running something similar to the tire on that truck you just posted (the blue one) but as low of a profile as possible.

 

And probably not 33s... I planned on 31s

 

Can you use 295/55 r20 with a 3/1 level kit?

 

Your just gonna have to make sure you have enough offset on wheels

 

How much you think is enough?.....i dont know

 

Found a deal on a set of Moto Metal MO962 18X9 wheels (0mm offset). Currently have a 2012 completely stock 4 door Tacoma. Going to be adding 5100's in the front and rear but concerned about needing to lift the front (other than lifting it two inches to level it using the 5100). What exactly will I have to trim or cut? I understand that I will not be able to use the front mud flaps anymore but other than that, what is the correct tire size/width for this rim. Thanks in advance for any replies and information.